期刊名称：STEEL AND COMPOSITE STRUCTURES
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Steel & Composite Structures, An International Journal, provides and excellent publication channel which reports the up-to-date research developments in the steel structures and steel-concrete composite structures, and FRP plated structures from the international steel community. The research results reported in this journal address all the aspects of theoretical and experimental research, including
 Buckling/Stability
Fatigue/Fracture
Fire Performance
Connections
Frames/Bridges
Plates/Shells
Composite Structural Components
Hybrid Structures
Fabrication/Maintenance
Design Codes
Dynamics/Vibrations
Nonferrous Metal Structures
Non-metalic plates
Analytical Methods
The Journal specially wishes to bridge the gap betwwn the theoretical developments and practical applications for the benefits of both academic researchers and practicing engineers. In this light, contributions from the practicing engineers are especially welcome.
Instructions to Authors
| 1. Submission of the paper |
| Authors are asked to submit manuscripts in PDF format electronically through the Techno-Press electronic Manuscript Upload System (TeMUS) (http://www.techno-press.org/papers). If you have difficulties in using TeMUS, please contact us at; [technop3@chol.com]. The system is also conveniently used to check the status of submitted papers. |
| 2. Preparation of the manuscript |
General : The manuscripts should be in English and typed with double line spacing on single side of A4 paper. Submitted papers will be published in four categories, i.e., 1)Research Papers, 2)Short Technical Notes, 3)Report papers and 4)Discussions. The first page of an article should contain; (1) a title which reflects the contents of the paper and is not too long ( no more than 85 characters or less than or equal to two title lines), (2) all the name(s) and address(es) of author(s), (3) name and address of the author to whom the correspondence and proofs should be sent, and (4) an abstract of 100~200 words except Technical Note(max. 4 journal pages) and Discussions. The text should include a list of references which reflect the current state of technology. The paper should be concluded by proper conclusions which reflect the findings in the paper. The length of the research paper should be about 16-20 journal pages. There will be no page charges if the length of the paper is within the page limit. A list of key words should be provided at the end of the abstract.
Tables and figures : Tables and figures should be consecutively numbered and headed with short titles. They should be referred to in the text as Fig. 1, Table 2, etc. Originally drawn figures and glossy prints of photographs should be provided in a form suitable for photographic reproduction and reduction in the journal. A separate list of captions for illustrations should be provided.
Color Printing : Color printing of figures is available on the author's request. Color figures in print version of the journal are charged with USD150 per figure up to 4 figures and USD100 per figure for additional figures. There will be NO charges for reproduction of color figures for online version
Units and mathematical expressions : : It is desirable that units of measurements and abbreviations should follow the Systeme Internationale(SI). The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as Eq. (1), Eq. (2).
References : References to the published literature should be referred in the text by the last name(s) of author(s) and the year of publication (e.g., Choi and Schnobrich 1975) and listed in the alphabetical order of the last name of the first author in an appendix at the end of the paper. References should be basically in English(Exceptionally, 1-2 references in other languages are allowed) and sufficient to reflect the current state-of-technology. Citation of the web site information as a reference is not encouraged as the site may disappear any time. Journal titles should be abbreviated in the style of the World List of Scientific Periodicals. References should be in the following style. |
Journal:
|
Choi, C.K. and Kim, S.H. (1989), 鈥淐oupled use of reduced integration and nonconforming modes in improving quadratic plate element鈥? Int. J. Num. Meth. Eng., 28(4), 1909-1928. |
Books:
|
Salvadori, M.G. and Baron, M.L. (1961), Numerical Methods in Engineering, Prentice-Hall, Englewood Cliffs, NJ. |
Proceedings:
|
Choi, C. K. and Kwak, H. G. (1989), "Optimum RC member design with discrete sections", Proceedings of '89 ASCE Structures Congress, San Francisco, May. | |
| 3. Review |
| All the submitted papers will undergo a peer-review process, and those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the "Steel and Composite Structures", after any required modifications are made |
| 4. Proofs |
| Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript at this stage will not be accepted. Proofs should be returned within 48 hours of receipt |
| 5. Copyright |
| Submission of an article to "Steel and Composite Structures" implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, the copyright thereof is transferred to the publisher by the Transfer of Copyright Agreement. |
Editorial Board
Prof. J.M. Aribert
INSA Rennes
35043 Rennes Cedex, France
Prof. F.S.K. Bijlaard
Delft Univ. of Technology
2628 CN, Delft, The Netherlands
Prof. Mark A Bradford
The University of New South Wales
NSW 2052, Australia
Prof. Luis Calado
Instituto Superior Tecnico
1096 Lisboa Codex, Portugal
Prof. W.F. Chen
University of Hawaii
Honolulu, HI 96822, U.S.A.
Prof. Ken P. Chong
National Inst. of Standard & Tech(NIST)
Gaitherburg, MD 20899-8611, U.S.A.
Prof. Dinar Camotim
Instituto Superior Tecnico
1049-001 Lisboa, Portugal
Prof. Luigino Dezi
University of Ancona
60131 Ancona, Italy
Prof. D. Dubina
Polyt. Univ. of Timisoara
Timisoara, Romania
Prof. W. Samuel Easterling
VPI & State Univ.
Blacksburg, VA 24060, U.S.A.
Prof. R. Greiner
Technical Univ. of Graz
A-8010 Graz, Austria
Prof. Lin-Hai Han
Tsinghua University
Beijing 100084, P.R. China
Prof. Miklos Ivanyi
Tech. Univ. of Budapest
Budapest, Hungary
Prof. S. Kato
Toyohashi Univ. of Tech.
Toyohashi 441, Japan
Prof. G.Q. Li
Tongji University
Shanghai 200092, P.R. China
Prof. R. Liew
Nat鈥檒 Univ. of Singapore
Singapore 0511, Singapore
Prof. Le-Wu Lu
Lehigh University
Bethlehem, PA 18015, U.S.A. |
Prof. P. Makelainen
Helsinki University of Tech.
FIN-02015 HUT, Finland
Prof. Deric J. Oehlers
Univ. of Adelaide
SA 5002, Australia
Prof. Kim Rasmussen
University of Sydney
NSW 2006, Australia
Prof. D. Redekop
University of Ottawa
Ottawa, K1N 6N5, Canada
Prof. Evangelos J. Sapountzakis
National Technical University of Athens
GR-15780, Athens, Greece
Prof. N. E. Shanmugam
Universiti Kebansaan Malaysia
43600 Bangi, Malaysia
Prof. Luis Simoes da Silva
University of Coimbra
3030-788 Coimbra, Portugal
Prof. Zhong Tao
Fuzhou University
Fujian Province 350108, P. R. China
Prof. J.G. Teng
Hong Kong Polyt. Univ.
Kowloon, Hong Kong
Prof. Robert Tremblay
Ecole Polytech. Montreal
Quebec H3C 3A7, Canada
Prof. Keh-Chyuan Tsai
Nat鈥檒 Taiwan Univ.
Taipei, 10617 Taiwan
Prof. Chia-Ming Uang
University of California
San Diego, CA 92093, U.S.A.
Prof. T. Usami
Nagoya University
Nagoya 464-01, Japan
Prof. Amit Varma
Purdue University
West Lafayette, IN 47907, USA
Dr. Yong Wang
The University of Manchester
Manchester, M60 1QD, UK
Prof. Riccardo Zandonini
Univ. of Trento
38050 Trento, Italy |
|
刊名字顺( Alphabetical List of Journals):
返回页首 