期刊名称：DISCRETE OPTIMIZATION
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Description
Discrete Optimization publishes research papers on the mathematical, computational and applied aspects of all areas of integer programming and combinatorial optimization. In addition to reports on mathematical results pertinent to discrete optimization, the journal welcomes submissions on algorithmic developments, computational experiments, and novel applications (in particular, large-scale and real-time applications). The journal also publishes clearly labelled surveys, reviews, short notes, and open problems. Manuscripts submitted for possible publication to Discrete Optimization should report on original research, should not have been previously published, and should not be under consideration for publication by any other journal.
Instructions to Authors
Guide for Authors
Online submission to the journal prior to acceptance
Submission to this journal proceeds totally online. Use the following guidelines to prepare your article. Via www.elsevier.com/authors you will be guided stepwise through the creation and uploading of the various files. The system automatically converts source files to a single Adobe Acrobat PDF version of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted to PDF at submission for the review process, these source files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail and via the Author's homepage, removing the need for a hard-copy paper trail. Return to top of document
Types of submissions
Contribution - Full length original research article of more than 10 pages.
Note- A short self-contained original research article of 10 pages or less, focusing on a particular result that does not provide enough material for a full length Contribution.
Communication - A short article outlining a new result or new research that can later be expanded to a full length Contribution. Please note that Communications should be sent directly to a member of the Editorial Board chosen by the author. The Editor will then conduct a review of the paper, ask the author for any necessary revisions, and will "communicate" the final paper to the Editorial Office.
Erratum- Concise correction to article of the same author published in the journal. The full publication data of the original paper should be included. ScienceDirect will provide a link to the Erratum in the original article.
Perspectives - Submission which does not provide a specific new research finding or result, but rather presents a survey of results and research in a particular area.
Return to top of document
Preparation of text
It is essential to give a fax number and e-mail address when submitting a manuscript. Articles must be written in standard English.
Language editing. For language editing services, please see  http://www.elsevier.com/locate/languagepolishing
LaTeX documents. If the LaTeX file is suitable, proofs will be produced without rekeying the text. The article should preferably be written using Elsevier's document class "elsart", or alternatively the standard document class "article".
Please see http://www.elsevier.com/latex for the Elsevier LaTeX package (including detailed instructions for LaTeX preparation).It consists of the files: elsart.cls, guidelines for users of elsart, a template file for quick start, and the instruction booklet "Preparing articles with LaTeX".
Provide the following data on the title page (in the order given).
Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the Authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the Author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each Author. Corresponding Author. Clearly indicate who is willing to handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.
Present/permanent address. If an Author has moved since the work described in the article was done, or was visiting at the time, a "Present address" (or "Permanent address") may be indicated as a footnote to that Author's name. The address at which the Author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract. A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separate from the article, so it must be able to stand alone.
Keywords. Please add 2 to 5 keywords to your article. Keywords assigned to articles will be assembled in a keyword index which will be printed in the last issue of each volume for each journal, and in cumulative indexes, as well as used to make your article more widely available through online keyword searches. Please use the following guidelines in choosing keywords for your article.
- Each keyword (which can be a phrase of more than one word) should describe one single concept. Words like "and" or "of" should be avoided.
- Avoid very general keywords which become meaningless once in a keyword list, e.g "graph", "computer", "mathematics", "optimization", etc.
- Check whether the keywords describe the outline of the article on the whole.
- Use natural language: for instance "automatic error recovery" rather than "error recovery, automatic".
- Try to use nouns and adjectives as much as possible (i.e. use "automatic error recovery" rather than "recovering errors automatically"). Do not use nouns in the plural form.
- Avoid the use of abbreviations as much as possible, unless an abbreviation is so well-established that the full term is rarely used (e.g. use "laser" instead of "Light Amplification by Stimulated Emission of Radiation", but use "computer aided design" instead of "CAD").
Preparation of supplementary data. Elsevier accepts supplementary material to support and enhance your scientific research. Supplementary files offer the Author additional possibilities to publish supporting applications, movies, animation sequences, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please ensure that data is provided in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit http://www.elsevier.com/artworkinstructions.
References. Responsibility for the accuracy of bibliographic citations lies entirely with the Authors. Text: Indicate references by number(s) in square brackets in line with the text. The actual Authors can be referred to, but the reference number(s) must always be given. Example: "..... as demonstrated [3,6]. Barnaby and Jones [8] obtained a different result ...."
List: Number the references (numbers in square brackets) in the list in the order in which they appear in the text.
Examples:
- Reference to a journal publication:
J. van der Geer, J.A.J. Hanraads, R.A. Lupton, The art of writing a scientific article, J. Sci. Commun. 163 (2000) 51-59.
- Reference to a book:
W. Strunk Jr., E.B. White, The Elements of Style, third ed., Macmillan, New York, 1979.
- Reference to a chapter in an edited book:
G.R. Mettam, L.B. Adams, How to prepare an electronic version of your article, in: B.S. Jones, R.Z. Smith (Eds.), Introduction to the Electronic Age, E-Publishing Inc., New York, 1999, pp. 281-304. Return to top of document Preparation of electronic illustrations
General points
- Make sure you use uniform lettering and sizing of your original artwork.
- Save text in illustrations as "graphics" or enclose the font.
- Only use the following fonts in your illustrations: Arial, Courier, Helvetica, Times, Symbol.
- Number the illustrations according to their sequence in the text.
- Use a logical naming convention for your artwork files.
- Provide all illustrations as separate files and as hardcopy printouts on separate sheets.
- Provide captions to illustrations separately.
- Produce images near to the desired size of the printed version.
A detailed guide on electronic artwork is available on our website: http://www.elsevier.com/artworkinstructions Return to top of document
General
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all Authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher.
Upon acceptance of an article, Authors will be asked to transfer copyright (for more information on copyright see http://www.elsevier.com/authorsrights). This transfer will ensure the widest possible dissemination of information. A letter will be sent to the corresponding Author confirming receipt of the manuscript. A form facilitating transfer of copyright will be provided.
If excerpts from other copyrighted works are included, the Author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by Authors in these cases: contact Elsevier's Rights Department, Oxford, UK: phone (+44) 1865 843830, fax (+44) 1865 853333, e-mail permissions@elsevier.com. Requests may also be completed online via the Elsevier homepage ( http://www.elsevier.com/locate/permissions).
Authors' rights. As an author you (or your employer or institution) may do the following:
- make copies (print or electronic) of the article for your own personal use, including for your own classroom teaching use
- make copies and distribute such copies (including through e-mail) of the article to research colleagues, for the personal use by such colleagues (but not commercially or systematically, e.g., via an e-mail list or list server)
- post a pre-print version of the article on Internet websites including electronic pre-print servers, and to retain indefinitely such version on such servers or sites
- post a revised personal version of the final text of the article (to reflect changes made in the peer review and editing process) on your personal or institutional website or server, with a link to the journal homepage (on elsevier.com)
- present the article at a meeting or conference and to distribute copies of the article to the delegates attending such a meeting
- for your employer, if the article is a 'work for hire', made within the scope of your employment, your employer may use all or part of the information in the article for other intra-company use (e.g., training)
- retain patent and trademark rights and rights to any processes or procedure described in the article
- include the article in full or in part in a thesis or dissertation (provided that this is not to be published commercially)
- use the article or any part thereof in a printed compilation of your works, such as collected writings or lecture notes (subsequent to publication of your article in the journal)
- prepare other derivative works, to extend the article into book-length form, or to otherwise re-use portions or excerpts in other works, with full acknowledgement of its original publication in the journal
Digital Object Identifier. The digital object identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information.
The correct format for citing a DOI is shown as: doi:10.1016/j.dam.2003.10.271.
When the DOI is used to create URL hyperlinks to documents on the web, they are guaranteed never to change. Return to top of document
Author benefits
No page charges. Publishing in Discrete Mathematics is free.
Free offprints. The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail or, alternatively, 25 free paper offprints. The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
Discount. Contributors to Elsevier journals are entitled to a 30% discount on all Elsevier books.
ScienceDirect The published article will be available via ScienceDirect.
Author enquiries
For enquiries relating to the submission of articles (including electronic submission where available) please visit this journal's homepage at http://www.elsevier.com/locate/disopt. You can track accepted articles at http://www.elsevier.com/trackarticle and set up e-mail alerts to inform you of when an article's status has changed, as well as copyright information, frequently asked questions and more.
Contact details for questions arising after acceptance of an article, especially those relating to proofs, are provided after registration of an article for publication. Return to top of document
 |
| |
|
Editorial Board
|
刊名字顺( Alphabetical List of Journals):
返回页首 