期刊名称：STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
The Structural Design of Tall and Special Buildings provides structural engineers and contractors with a detailed written presentation of innovative structural engineering and construction practices for tall and special buildings. It also presents applied research on new materials or analysis methods that can directly benefit structural engineers involved in the design of tall and special buildings. The editor's policy is to maintain a reasonable balance between papers from design engineers and from research workers so that the Journal will be useful to both groups. The problems in this field and their solutions are international in character and require a knowledge of several traditional disciplines and the Journal will reflect this. The main subject of the Journal is the structural design and construction of tall and special buildings. The basic definition of a tall building, in the context of the Journal audience, is a structure that is equal to or greater than 160 feet in height, or 6 stories or greater. A special structure is one with unique architectural or structural characteristics. The journal will present papers on new innovative structural systems, materials and methods of analysis
Instructions to Authors
Initial Manuscript Submission. Submit three copies of the manuscript (including copies of tables and illustrations) to Gary. C. Hart, Hart-Weidlinger, 2525 Michigan Avenue, Bergamot Station D2-3, Santa Monica, CA 90404, U.S.A. If desired, submissions may be made to that member of the Advisory Editorial Board who, in the opinion of the author, is most closely concerned with the subject matter of the paper.
Authors must also supply:
- an electronic copy of the final version (see section below),
- a Copyright Transfer Agreement with original signature(s) - without this we are unable to accept the submission, and
- permission grants - if the manuscript contains extracts, including illustrations, from other copyright works (including material from on-line or intranet sources) it is the author's responsibility to obtain written permission from the owners of the publishing rights to reproduce such extracts using the Wiley Permission Request Form. Permission grants should be submitted with the manuscript.
Submitted manuscripts should not have been previously published and should not be submitted for publication elsewhere while they are under consideration by Wiley. Submitted material will not be returned to the author unless specifically requested.
Electronic submission. The electronic copy of the final, revised manuscript must be sent to the Editor together with the paper copy. Disks should be PC or Mac formatted; write on the disk the software package used, the name of the author and the name of the journal. We are able to use most word processing packages, but prefer Word or WordPerfect and TeX or one of its derivatives.
Illustrations must be submitted in electronic format where possible. Save each figure as a separate file, in TIFF or EPS format preferably, and include the source file. Write on the disk the software package used to create them; we favour dedicated illustration packages over tools such as Excel or Powerpoint.
Manuscript style. The language of the journal is English. All submissions including book reviews must have a title, be printed on one side of the paper, be double-line spaced and have a margin of 3cm all round. Illustrations and tables must be printed on separate sheets, and not be incorporated into the text.
- The title page must list the full title, short title and names and affiliations of all authors. Give the full address, including email, telephone and fax, of the author who is to check the proofs.
- Include the name(s) of any sponsor(s) of the research contained in the paper, along with grant number(s).
- Supply a summary of up to 200 words for all articles . A summary is a concise summary of the whole paper, not just the conclusions, and is understandable without reference to the rest of the paper. It should contain no citation to other published work.
- Include up to six keywords that describe your paper for indexing purposes.
- Include also a brief biography of each author, along with a photograph.
Reference style. References should be quoted in the text as name and year within brackets and listed at the end of the paper alphabetically. Where reference is made to more than one work by the same author published in the same year, identify each citation in the text as follows: (Collins, 1998a), (Collins, 1998b). Where three or more authors are listed in the reference list, please cite in the text as (Collins et al., 1998)
All references must be complete and accurate. Where possible the DOIfor the reference should be included at the end of the reference. Online citations should include date of access. If necessary, cite unpublished or personal work in the text but do not include it in the reference list. References should be listed in the following style:
- Report
- Shen J-H, Astaneh A. 1990. Seismic response evaluation of an instrumented six story building. Report No. EERC 90-20. Earthquake Engineering Research Center, University of California, Berkeley, CA.
- Journal Article
- Zeidabadi NA, Mirtalae K, Mobasher B. 2004. Optimized use of the outrigger system to stiffen the coupled shear walls in tall buildings. Struct. Design Tall Spec. Build. 13:9-27. DOI: 10.1002/tal.228
- Book
- Clough RW, Penzien J. 1975. Dynamics of Structures.McGraw Hill: New York.
Illustrations. Supply each illustration on a separate sheet, with the lead author's name and the figure number, with the top of the figure indicated, on the reverse. Supply original photographs; photocopies or previously printed material will not be used. Line artwork must be high-quality laser output (not photocopies). Tints are not acceptable; lettering must be of a reasonable size that would still be clearly legible upon reduction, and consistent within each figure and set of figures. Supply artwork at the intended size for printing.
The cost of printing colour illustrations in the journal will be charged to the author. If colour illustrations are supplied electronically in either TIFF or EPS format, they may be used in the PDF of the article at no cost to the author, even if this illustration was printed in black and white in the journal. The PDF will appear on the Wiley InterScience site.
Copyright. To enable the publisher to disseminate the author's work to the fullest extent, the author must sign a Copyright Transfer Agreement, transferring copyright in the article from the author to the publisher, and submit the original signed agreement with the article presented for publication. A copy of the agreement to be used (which may be photocopied) can be found in each volume of The Structure and Design of Tall and Special Buildings. Copies may also be obtained from the journal editor or publisher, or may be printed from this website.
Further Information. Proofs will be sent to the author for checking. This stage is to be used only to correct errors that may have been introduced during the production process. Prompt return of the corrected proofs, preferably within two days of receipt, will minimise the risk of the paper being held over to a later issue. 25 complimentary offprints will be provided to the author who checked the proofs, unless otherwise indicated. Further offprints and copies of the journal may be ordered. There is no page charge to authors.
Editorial Board
EDITOR
Gary C. Hart
Professor Emeritus, Department of Civil and Environmental Engineering, University of California - Los Angeles, and Principal Division Director, Hart-Weidlinger, A Division of Weidlinger Associates, Inc., 2525 Michigan Avenue, Bergamot Station D2-3, Santa Monica, CA 90404, U.S.A.
ASSOCIATE EDITOR
Nabih Youssef
Nabih Youssef and Associates
800 Wilshire Boulevard Suite 510
Los Angeles CA 90017, USA
INTERNATIONAL EDITORIAL BOARD
Jefferson Asher
KPFF Consulting Engineers
6080 Center Drive, Suite 300
Los Angeles, CA 90045, U.S.A. P.V. Banavalkar
Ingenium, Inc.,
7700 San Felipe, Suite 110, Houston
TX 77063, U.S.A.
Gregg E. Brandow
President, Brandow & Johnston Assoc.
1660 West Third Street, Los Angeles
CA 90017, U.S.A. Lauren D. Carpenter
Principal, Wong Hobach Lau
300 S. Grand Ave, Suite 3250
Los Angeles, CA 90071, U.S.A.
Jay-Chung Chen
Director of Research Centre
Professor of Mechanical Engineering
The Hong Kong University
Science and Technology
Clear Water Bay, Kowloon
Hong Kong Amr Salah Elnashai
Newmark Civil Engineering Laboratory
205 North Mathews Ave
Urbana, IL 61801-2397, USA
S.K. Ghosh
S.K. Ghosh Associates Inc.,
334 East Colfax Street, Suite E
Palatine, IL 60067, USA Barry J. Goodno
Professor of Structural Engineering
School of Civil Engineering
Georgia Institute of Technology
Atlanta, GA 30332-0355, U.S.A.
Jun Kanda
Faculty of Engineering
Department of Architecture
The University of Tokyo
7-3-1 Hongo, Bunkyo-ku
Tokyo 113, Japan John A. Martin, Jr.
President, John A. Martin & Associates
1212 S. Flower Street, Los Angeles
CA 90015, U.S.A.
Farzad Naeim
Vice President, John A. Martin & Associates
1212 S. Flower Street, Los Angeles
CA 90015, USA Guy J.P. Nordenson
Guy Nordenson & Assoc.
198 Broadway, 10th Floor
New York, NY 10038 U.S.A.
Chris Poland
President, Degenkolb Engineers
225 Bush Street
Suite 1000
San Francisco
CA 94104, USA M.J. Nigel Priestley
286 Main Road
Sumner
Christchurch 8008
New Zealand
Andrei M. Reinhorn
Professor & Chair, University of Buffalo
(SUNY), Department of Civil Engineering
231 Ketter Hall, Buffalo, NY, 14620, U.S.A. Charles H. Thornton
Principal, Thornton-Tomasetti Engineers
641 Avenue of the Americas
New York, NY 10011, USA
John Wallace
Professor, Department of Civil
and Environmental Engineering
5731 Boelter Hall
University of California - Los Angeles
Los Angeles, CA 90024, USA Andrew Whittaker
Associate Professor, State University
of New York at Buffalo
Department of Civil, Structural and Environmental
Engineering, 230 Ketter Hall
Buffalo, NY 14260, U.S.A
Chau-Shioung Yeh
Director and Professor
National Center for Research
on Earthquake Engineering
National Taiwan University, Taipei
Taiwan, Republic of China Xu Zhixin
Professor, Tongji University
Shanghai
People's Republic of China
|
刊名字顺( Alphabetical List of Journals):
返回页首 