期刊名称：MACHINING SCIENCE AND TECHNOLOGY
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Machining Science & Technology
Published By: Taylor & Francis
Volume Number: 12
Frequency: 4 issues per year
Print ISSN: 1091-0344
Online ISSN: 1532-2483
Aims & Scope
2007 Impact Factor: 0.621
Ranking: (126/189 in Materials Science, Multidisciplinary, 43/107 in Engineering, Mechanical, 18/38 in Engineering, Manufacturing)
?2008 Thomson Reuters, Journal Citation Reports?BR>
Machining Science and Technology publishes original scientific and technical papers and review articles on topics related to machining and traditional and nontraditional machining processes performed on all materials-metals, polymers, ceramics, and composites. In addition, this high-quality journal covers novel concepts for machining of advanced materials; measurement of surface quality and metrology including detection and characterization of machining damage; special cutting tools, coated inserts, new grinding wheels, special coolants, and cutting fluids; and design and implementation of in-process sensors for monitoring and control of surface quality and integrity.
Instructions to Authors
Instructions for Authors
Aims and Scope:
Machining Science and Technology is a refereed journal in the English language that publishes original scientific papers, short technical communications, as well as review articles, on topics related to machining. Both traditional and nontraditional material removal processes performed on all materials 杕etals,polymers,ceramics,and composites 朼re of interest. Full-length articles, reviews, short communications, and special reports are published in the journal.
Submission of Manuscripts:
Machining Science and Technology receives all manuscript submissions electronically via their Manuscript Central website located at: http://mc.manuscriptcentral.com/LMST. Manuscript Central allows for rapid submission of original and revised manuscripts, as well as facilitating the review process and internal communication between authors, editors and reviewers via a web-based platform. For Manuscript Central technical support,you may contact them by e-mail or phone support via http://mcv3support.custhelp.com/. If you have any other requests please contact the journal at jawahir@engr.uky.edu. Each manuscript must be accompanied by a written declaration that it has not been published elsewhere, that it has not been submitted simultaneously for publication elsewhere, and that all co-authors have read the manuscript and agree to the accuracy of their manuscript. Authors are responsible for obtaining permission to reproduce copyrighted material from other sources and are required to sign an agreement for the transfer of copyright to the publisher. All accepted manuscripts, artwork, and photographs become the property of the publisher.
Manuscript Format:
All manuscripts must be prepared according to the following guidelines to be considered for review:
- Electronic text files must be in Microsoft Word TM or PDF format,typewritten on letter-size pages (8.5 in.11 in.) with margins of 1 inch on all sides,and in single-column,double-space format. Pages should be numbered consecutively throughout the manuscript. The text should be in Times New Roman font, size:12 pt.Machining Science and Technology is an international journal, hence both US English and International English are accepted for submitted manuscripts.
- Following the title,authors should also supply a shortened version of the title suitable for the running head, not exceeding 50 character spaces.The corresponding author should be clearly indicated when listing the authors 'names and affiliations. Contact details, including email address, for the corresponding author should be given at the bottom of the manuscript's front page. Each article should be summarized in an abstract of not more than 200 words. Avoid abbreviations, diagrams, and references in the abstract. A maximum of six keywords should be provided after the abstract.
- All section headings (Introduction,Conclusions,etc.), as well as the title, should be in bold, capital
letters. First-level subheadings should be in bold letters, and in sentence case. Different sections of the manuscript's main body should be presented in the order: Introduction,...,Summary = Conclusion, Acknowledgement (if necessary), Nomenclature (if necessary), References, Figures, Tables, Appendices (if necessary).
- All equations must be numbered, displayed in italics (or equation-type font), and presented on separate lines. All variables (Fx ,Fy ,Fz ,Ra ,etc.) must be in italics, including occurrences within figures and tables. The use of SI units is encouraged. When English units are used,SI equivalents should be provided within brackets.
- Tables and figures should not be embedded within the body of the text,but should be presented on separate pages at the end of the text in a single document file, or else provided as separate electronic files. All units must be included wherever necessary. A short descriptive title should appear above each table, with a clear legend and any footnotes suitably identified below. Figures should be completely labeled, taking into account necessary size reduction. A short descriptive caption should be placed below each figure, with a clear legend and any footnotes suitably identified below. Any text within figures and tables should be appropriately sized 杔arge enough to be clearly read, but no larger than the text in the main body of the manuscript. Illustrations submitted (line drawings, halftones, photos, photomicrographs,etc.) should be clean originals or digital files. Digital files are recommended for highest quality reproduction and should have a resolution of 300 dpi or higher.Figures should be supplied in eps, jpg, or tiff file formats.Scales must be shown where appropriate.
- For figures containing plotted data,all axes must be appropriately labeled (including corresponding units). Kindly ensure that different plotted points =lines =curves are clearly distinguishable from each other upon printing in grayscale, which is the default printing scheme.
Note: Color illustrations will be considered for publication;however,the author will be required to bear the full cost involved in color art reproduction.Color art can be purchased for online-only conversion and reproduction or for print ?online reproduction.Color reprints can only be ordered if print ?online reproduction costs are paid.Rates for color art reproduction are: Online-Only Reproduction: $225 for the first page of color;$100 per page for each of the next three pages of color. A maximum charge of $525 applies. Print +Online Reproduction: $900 for the first page of color; $450 per page for each of the next three pages of color. A custom quote will be provided for articles with more than four pages of color.
- Please cite references in the text by author name,with the publication year enclosed in parentheses.
Examples:
i. For 1 author: 憫Li (2000) found ...'' OR 憫It has been found that ...(Li,2000)''
ii. For 2 authors:憫Xu and Li (2001) observed ...'' OR 憫It has been observed that ...(Xu and Li, 2001)''
iii. For more than 2 authors: 憫Li et al. (2002) showed ...''OR 憫It has been observed that ... (Li et al., 2002)''
When referring to multiple articles at once,please separate references with a semicolon as follows: (Li, 2000; Xu and Li, 2001; Li et al., 2002).
When citing multiple articles by the same author in the same year,please differentiate between them using letters following the year, for example: (Li et al., 2002a; Li et al., 2002b).
For additional information, please consult the Chicago Manual of Style.
- At the end of the article,list the references in alphabetical order,as per one of the following formats:
i. For journal papers: Brown, P.R.; Lundie-Jenkins, G.(1999) Non-target mortalities during aerial strychnine baiting of house mice.Wildlife Research, 26 (1):1 ?5.
ii. For work presented at conferences and meetings: Garrone, E.; Ugliengo,O. (1988) Silanol as a model for the free hydroxyl of amorphous silica. In Structure and Reactivity of Surfaces, Proceedings of the European Conference, Trieste, Italy; Zecchina, A.; Costa, G.; Morterra, C., Eds., Elsevier: Amsterdam.
iii. For books: New,T.R. (1991) Insects as Predators. 2nd Edition, New South Wales University Press: Kensington, Australia.
Please do not abbreviate the names of journals,proceedings,etc.
Reprints:
Each corresponding author will receive a PDF file of their published article via email. This file is for personal use only and may not be copied and disseminated without the prior written permission of Taylor &Francis Group, LLC.
Editorial Board
Editorial Board
EXECUTIVE EDITOR:
S. Jahanmir
MiTiHeart Corporation
P.O. Box 83610
Gaithersburg, MD 20883, USA
sjahanmir@mitiheart.com
TECHNICAL EDITOR:
I. S. Jawahir
University of Kentucky
Department of Mechanical Engineering
414C, CRMS Building
Lexington, KY 40506-0108, USA
jawahir@engr.uky.edu
SPECIAL ISSUES EDITOR:
R. Stevenson
General Motors R&D Center
Manufacturing Systems Research Labs
Mail Code 480-106-359
30500 Mound Road
Warren, MI 48090-9055, USA
robin.stevenson@gm.com
EDITORIAL ASSISTANT:
A. D. Jayal
University of Kentucky
Department of Mechanical Engineering, and Center for Manufacturing
Editorial Office
425 CRMS Building
Lexington, KY 40506-0108, USA
jayal@engr.uky.edu
ASSOCIATE TECHNICAL EDITORS:
A. K. Balaji - University of Utah, Salt Lake City, UT, USA
C. Guo - United Technologies Research Center, East Hartford, CT, USA
I. Inasaki - Keio University, Yokohama-shi, Japan
R. Ivester - National Institute of Standards and Technology, Gaithersburg, MD, USA
P. Koshy - McMaster University, Hamilton, Ontario, Canada
V. Madhavan - Wichita State University, Wichita, KS, USA
P. Mathew - University of New South Wales, Sydney, NSW, Australia
S. Melkote - Georgia Institute of Technology, Atlanta, GA, USA
Z. J. Pei - Kansas State University, Manhattan, KS, USA
G. Poulachon - Labomap-Machining Division, ENSAM, CLUNY, France
J. T. Roth - The Behrend College, Penn State Erie, Erie, PA, USA
R. Teti - University of Naples Federico II, Naples, Italy
INTERNATIONAL EDITORIAL ADVISORY BOARD
Y. Altintas - University of British Columbia, Canada
H. Attia - National Research Council of Canada, Canada
C. D. Bouzakis - Aristoteles University of Thessaloniki, Greece
G. Byrne - University College Dublin, Ireland
T. H. C. Childs - University of Leeds, United Kingdom
D. Dornfeld - University of California Berkeley, USA
M. A. Elbestawi - McMaster University, Canada
J. F. Gomes De Oliveira - Universidade de Sao Paulo, Brazil
M. Hashish - Flow International, USA
H. Hocheng - National Tsing Hua University, R.O.C.
W. Hung - Texas A&M University, USA
V. K. Jain - Indian Institute of Technology Kanpur, India
F. Klocke - Fraunhofer Institut f黵 Produktionstechnologie, Germany
R. Komanduri - Oklahoma State University, USA
J. Leopold - Fraunhofer IWU, Germany
S. Malkin - University of Massachusetts at Amherst, USA
I. Marinescu - University of Toledo, USA
J. A. McGeough - University of Edinburgh, United Kingdom
A. Moisan - ENSAM, France
K. P. Rajurkar - University of Nebraska, USA
M. Ramulu - University of Washington, USA
K. Subramanian - Saint Gobain Abrasives, Inc., USA
H. K. Tonshoff - University of Hannover, Germany
K. Ueda - University of Tokyo, Japan
F. Venialli - Universita di Roma 揟or Vergata? Italy
V. C. Venkatesh - University of Technology, Malaysia
|
刊名字顺( Alphabetical List of Journals):
返回页首 