期刊名称：JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Journal of Materials Science: Materials in Medicine
| Official Journal of the European Society for Biomaterials |
|
Journal of Materials Science: Materials in Medicine is an established refereed monthly companion to the Journal of Materials Science. It publishes papers on the science and technology of biomaterials and their applications as medical or dental implants, prostheses and devices, and of biological materials. Materials in Medicine covers a wide range of topics from the basic underpinning science to clinical applications, around a central theme of materials in medicine and dentistry. The core element of the Journal is the structure, properties and applications of natural materials as well as the metals, ceramics, polymers and composites used in orthopaedic, maxillo-facial, cardiovascular, neurological, ophthalmic and dental applications. Special biomedical topics include cell-biomaterial interactions, biocompatibility, tissue biomechanics, deformation, fracture, creep, fatigue, in vivo implantation, degradation, X-ray and electron microscope characterisation, surface analysis, metallurgical processing, powder processing, polymer and composite fabrication, prosthesis biomechanics and clinical trials. |
 |
Instructions to Authors
1. Aims, Scope and Submission of papers
1.1. The Journal of Materials Science: Materials in Medicine is published monthly. It covers a wide range of topics in the field of bio materials for medicine and dentistry. Submissions should be sent in triplicate to Professor William Bonfield, Kluwer Academic Publishers, 101 Philip Drive, Norwell, MA 02061, USA Please note that the resubmission of rejected manuscripts will not be accepted.
1.2. The Journal of Materials Science: Materials in Medicine is part of the Journal of Materials Science family of journals. The main journal, The Journal of Materials Science is published bi-weekly. Papers span a very wide range of materials which are investigated in a variety of physical forms using many different techniques. Original research results on international and interdisciplinary subjects involving metals, ceramics, glasses, polymers, electrical materials, composite materials, fibers, biological and biomedical materials are considered for publication. Review articles of topical interest are considered for publication. Submissions to Journal of Materials Science should be sent in triplicate to Professor Rees D. Rawlings (address as above).
1.3. The Journal of Materials Science Letters is published bi-weekly. It consists of short, original communications normally less than 1500 words. It publishes letters on the same variety of topics as Journal of Materials Science. Submissions to Journal of Materials Science Letters should be sent in triplicate to Professor Rees D. Rawlings (address as above).
1.4. The Journal of Materials Science: Materials in Electronics is published monthly. It publishes original research papers on both conventional and new preparation methods and applications of materials in the field of electronics. Submissions should be sent in triplicate to: Professor A. Willoughby, Engineering Materials, Room 3009, Eustice Building, The University, Southampton S017 1BJ, UK.
1.5. The Reviews Editor for Journal of Materials Science, Professor R. J. Young and the Reviews Editor for Materials in Electronics, Professor Safa Kasap will be happy to receive suggestions for suitable subjects for review. Submissions should be sent in triplicate for Journal of Materials Science to Professor R. J. Young, University of Manchester, Institute of Science and Technology Grosvenor Street, Manchester, M17HS, UK. Submissions should also be sent in triplicate for Materials in Electronics to: Professor Safa Kasap, Dept. of Electrical Engineering, 57 Campus Drive, University of Saskatchewan, Saskatoon, S7N 5A9, CANADA. E-mail: Safa.Kasap@usask.ca.
2. Copyright
Submission of an article to any of the above mentioned journals is taken to imply that it presents original, unpublished work, not under consideration for publication elsewhere. A Copyright assignment form will be sent to the authors of submitted papers prior to refereeing. This publication agreement should be completed and returned to the editorial office. The agreement becomes void if the paper is not accepted for publication in the journal. The copyright covers the exclusive rights to reproduce and distribute the article, including reprints, photographic reproductions, microfilm or any other reproductions of similar nature, and translations.
3. The manuscript
3.1. Language and style
The manuscript must be in English. Permission to reproduce previously published material must be obtained by the author prior to submission. The manuscript should be typed on paper of the following dimensions: 203x267 mm, 216x279 mm or 210x297 mm with margins of at least 25 mm, using double spacing throughout. On acceptance, authors are requested to provide a disc with an ASCII version of the manuscript. Three copies of the manuscript should be sent, matching the contents of the disc exactly.
3.2. Presentation
For Journal of Materials Science, Journal of Materials Science: Materials in Electronics and Journal of Materials Science: Materials in Medicine each of the following sections should begin on separate pages: title page, abstract and keywords, text, acknowledgments, references, individual tables, figure legends. The abstract should be a brief and factual statement of the contents, which should not exceed 200 words in length. The main text of the paper should be divided into sections and subsections as exemplified in the headings of these "Instructions for authors".
The above format does not apply when submitting to Journal of Materials Science Letters. For this journal, the format is that of a chronologically constructed letter, which should be less than 1600 words in length.
Pages should be numbered consecutively beginning with the title page. Please adhere to these instructions carefully as improperly prepared manuscripts will be returned for alteration.
3.3. References
References should be numbered consecutively in the text, As: "According to a recent theory [4]..." and collected at the end of the paper in the following styles, for journals, proceedings and books, respectively:
4. A. BLACK and C. DENT, J. Mater. Sci.1 (1997) 274.
5. R. CHANG, in Proceedings of the 2nd International Conference on Fracture, Brighton, April 1997, edited by P. L. Pratt (Chapman & Hall, London, 1996) p. 306.
6. R. J. YOUNG, in "Introduction to Polymers" (Chapman & Hall, London, 1995) p. 137.
3.4. Illustrations
All illustrations, of whatever type, should be numbered in a single sequence and referred to in the text and caption as Fig. 1, Fig. 2, etc. The author憇 name and the figure number should be clearly shown on the front or back of each illustration. Original art-work should be sent; photocopies or any other form of copy will generally be unsuitable for reproduction in the Journals. A separate list of captions for illustrations should be provided and a note inserted in the typescript to indicate where they should appear. Figures may be provided on disc, but a hard copy must also be sent.
3.4.1. Line diagrams. Originals must be presented as high quality, laser printed computer output. Lettering should be unambiguous and of suitable size. Handwritten annotations are not acceptable.
3.4.2. Photographs. Photographs should be positive glossy prints, unmarked and not creased, and of high contrast. They must have internal scale bars. Symbols, arrows, or letters used in photographs should contrast with the background. Colour printing is available, subject to the author meeting the extra cost involved. Please note that the Publishers regret that original micrographs cannot be returned.
3.4.3. Units and abbreviations. SI units must be used.
All abbreviations should be spelt out in full on first appearance, e.g., scanning electron microscope (SEM). 4. Offprints
A total of 25 offprints for each article will be provided free. Extra copies can be purchased using the Offprint Order Form provided with the proofs or an acceptance of the article. 5. Cover photographs
The cover photographs are enlarged versions of photographs appearing in the issues. Contributors are invited to draw the Editor憇 attention to a photograph of outstanding scientific importance. Larger copies of these illustrations may be submitted.
For more detailed information please contact the relevant Editor or write to: Kluwer Academic Publishers, JMSM, 101 Philip Drive, Norwell, MA 02061, USA.
Editorial Board
EDITOR
Professor William Bonfield
Professor of Medical Materials
Department of Materials Science and
Metallurgy
University of Cambridge, UK
ASSOCIATE EDITOR
Dr Serena Best
Cambridge Centre for Medical Materials
Department of Materials Science and
Metallurgy
University of Cambridge, UK
EDITORIAL BOARD
Professor T. Akaike
Tokyo Institute of Technology, Japan
Professor L. Ambrosio
University of Naples 揊ederico II?/P>
Professor H. Aoki
Tokyo Denki University
Frontier Research and Development Center, Japan
Professor C. Baquey
Universit?Victor Segalen Bordeaux II, France
Professor L.M. Bjursten
University of Lund, Malm? Sweden
Dr J. de Bruijn
IsoTis BV, The Netherlands
Professor K. De Groot
University of Leiden, The Netherlands
Professor P. Ducheyne
University of Pennsylvania, USA
Dr R. Eloy
Unit?37 de I扞NSERM, Bron Cedex, France
Professor J. Feijen
University of Twente, The Netherlands
Professor P. Giusti
University of Pisa, Italy
Professor U. Gross
Freie Universit鋞 Berlin, Germany
Professor L. Hench
Imperial College of Science, Technology & Medicine, UK
Professor M. Josefowicz
Universit?Paris-Nord, France
Professor B. Kasemo
Chalmers University of Technology, G鰐eborg, Sweden
Professor J.L. Katz
Case Western Reserve University, Ohio, USA
Professor H. Kawahara
Institute of Clinical Materials, Osaka, Japan
Professor C.J. Kirkpatrick
Johannes Gutenberg University, Mainz, Germany
Professor I. Knets
Riga Technical University, Latvia
Professor T. Kokubo
Kyoto University, Japan
Professor R.P. Kusy
University of North Carolina at Chapel Hill, USA
Professor L. Nicolais
University of Naples Federico II, Italy
Professor H. Oonishi
Osaka-Minami National Hospital, Japan
Professor R.M. Pilliar
University of Toronto, Canada
Professor J.A. Planell
Universitat Politecnkca de Catalunya,
Barcelona, Spain
Professor E.L. Radin
Henry Ford Hospital, Detroit, Michigan, USA
Professor P. Revell
Royal Free and University College Medical School,
London, UK
Professor Y. Sakurai
Tokyo Women抯 Medical College, Japan
Professor S.G. Steinemann
Universit?de Lausanne, Switzerland
Professor P. Thomsen
University of G鰐eborg, Sweden
Professor P. Tranquilli-Leali
Universita Cattolica, Rome, Italy
Professor M.S. Valiathan
Manipal Academy of Higher Education, India
Professor I.V. Yannas
Massachusetts Institute of Technology, Massachusetts,
USA
|
刊名字顺( Alphabetical List of Journals):
返回页首 