期刊名称：INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
The International Journal of Computer Integrated Manufacturing is a journal of new knowledge, reporting research and applications, underlining the opportunities and limitations of CIM, and demonstrating how new technology can be developed and used in specific manufacturing situations. IJCIM has been enthusiastically received by the international manufacturing community, and has become a key forum for academics and industrial researchers to exchange information and ideas. In response to this interest, IJCIM is published six times a year, which enables the editors to target special issues on topics as diverse as architectures, human factors, product design and process planning, object-oriented manufacturing and focused issues covering regional research such as in the ESPRIT Program and in the Four Dragons of the Pacific Rim.
Instructions to Authors
***Note to Authors: please make sure your contact address information is clearly visible on the outside of all packages you are sending to Editors.***
The International Journal of Computer Integrated Manufacturing is a journal of new knowledge, reporting research and applications, underlining the opportunities and limitations of CIM, and demonstrating how new technology can be developed and used in specific manufacturing situations. The journal has been enthusiastically received by the international manufacturing community, and has become a key forum for academics and industrial researchers to exchange information and ideas. In response to this interest, the International Journal of Computer Integrated Manufacturing is published six times a year, which enables the editors to target special issues on topics as diverse as architectures, human factors, product design and process planning, object-oriented manufacturing and focused issues covering regional research such as in the ESPRIT Programme and in the Four Dragons of the Pacific Rim.
The International Journal of Computer Integrated Manufacturing is now available online.
Papers for consideration should be sent to the Editor, Stephen Newman, at the address given below, or to the appropriate regional or specialist Editor.
Editor: Stephen Newman, Editor, Advanced Manufacturing Technology Centre, Department of Manufacturing Engineering, Loughborough University, Loughborough LE11 3TU. E-mail: s.t.newman@lboro.ac.uk
Editor for North America: Professor Paul Ranky, New Jersey Institute of Technology, USA
Editor for Europe: Professor Fran鏾is Vernadat, European Commission, Luxembourg
Editor-at-large: Professor George Chryssolouris, Laboratory for Manufacturing Systems, Department of Mechanical Engineering, University of Patras, Patras 26110, Greece
Book Reviews Editor: Shahin Rahimifard - Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, Loughborough, UK
About Taylor & Francis
The foundations of Taylor & Francis were laid in pioneering fashion in 1798. Richard Taylor printed and launched the Philosophical Magazine, one of the first scientific journals published by an independent company. It was the start of a close collaboration with many famous scholarly societies including the Royal Astronomical Society, the Zoological Society, the Horticultural Society, the Royal Botanical Society and the Linnean Society of London. Dr William Francis, a chemist, joined Richard Taylor in 1852 and continued the tradition of close links between the scientific community and the company. With the proliferation of periodicals and information generated by learned societies at the turn of the century, Taylor & Francis also became pioneers in the field of abstracting journals, and in 1890 the company became the first printer of Science Abstracts, the precursor of today抯 Physics Abstracts.
Book publishing was a mostly secondary concern for the company until the 1960s, when significant expansion was implemented at all levels from schoolbooks to high level monographs. Since then the focus of book publishing has been predominantly at the undergraduate level and above, with an ever larger number of subject areas brought into the programme. The principles which drove the founders of Taylor & Francis are still paramount today. Academic scholarship must be of the highest quality, which is reflected in appropriate production practices and values. We hope that we remain true to those principles and that being a Taylor & Francis author is still a pleasant, profitable and proud experience.
Contacting Taylor & Francis
Sophie Harrap, Editorial Manager (Journals), Taylor & Francis Ltd, 4 Park Square, Milton Park, Abingdon, Oxon, OX14 4RN, UK; e-mail: sophie.harrap@tandf.co.uk
Submitting a paper to the International Journal of Computer Integrated Manufacturing
Please read these Guidelines with care and attention: failure to follow them may result in your paper being delayed. Note especially the referencing conventions used by the International Journal of Computer Integrated Manufacturing and the requirement for gender-, race-, and creed-inclusive language.
The International Journal of Computer Integrated Manufacturing considers all manuscripts on condition they are the property (copyright) of the submitting author(s) and that copyright will be transferred to the International Journal of Computer Integrated Manufacturing and the publishers, Taylor & Francis Ltd, if the paper is accepted.
The International Journal of Computer Integrated Manufacturing considers all manuscripts on the strict condition that they have been submitted only to the International Journal of Computer Integrated Manufacturing, that they have not been published already, nor are they under consideration for publication or in press elsewhere. Authors who fail to adhere to this condition will be charged all costs which the International Journal of Computer Integrated Manufacturing incurs, and their papers will not be published.
Contributions to the International Journal of Computer Integrated Manufacturing must report original research and will be subjected to review by referees.
Three copies of the English language version of the manuscript must be submitted for consideration, together with one set of high quality figures for reproduction.
Accepted manuscripts in their final revised versions must also be submitted as electronic word processing files on disk梥ee 慐lectronic processing?/B>.
There are no page charges for publication in the International Journal of Computer Integrated Manufacturing.
Writing your paper
- A typical article will not exceed 6000 words, plus two pages of figures. Papers that greatly exceed this will be critically reviewed with respect to length. Authors should include a word count with their manuscript.
- Please write clearly and concisely, clearly stating and defining objectives and terms. Arguments should be substantiated with well-reasoned supporting evidence.
- For all manuscripts, non-discriminatory language is mandatory. Sexist or racist terms should not be used.
- Manuscripts should be typed on single sides of A4 or 8?11 inch good quality white paper, double-spaced throughout including the reference section.
- All the authors of a paper should include their full names, affiliations, postal addresses, telephone and fax numbers and e-mail addresses on the title page.
- Abstracts of up to 200 words are required for all papers submitted and should precede the text of a paper梥ee 慉bstracts?/B>.
- Manuscripts should be compiled in the following order: title page; abstract; main text; acknowledgments; appendixes (as appropriate); references; table(s) with caption(s) (on individual sheets); figure caption(s) (as a list).
- Section headings should be concise and numbered sequentially, using a decimal system for subsections.
- In writing your paper, you are encouraged to review articles in the area you are addressing that have been previously published in the Journal and, where you feel appropriate, to reference them. This will enhance context, coherence and continuity for our readers.
Copyright permission
Contributors are required to secure permission for the reproduction of any figure, table or extensive (more than fifty-word) extract from the text of a source which is copyrighted梠r owned梑y a party other than Taylor & Francis or the contributor.
This applies both to direct reproduction or 慸erivative reproduction挆when the contributor has created a new figure or table which derives substantially from a copyrighted source.
The following form of words can be used in seeking permission.
Dear [COPYRIGHT HOLDER]
I/we are preparing for publication an article entitled
[STATE TITLE]
to be published by Taylor & Francis Ltd in the International Journal of Computer Integrated Manufacturing.
I/we should be grateful if you would grant us permission to include the following materials:
[STATE PAGE, FIGURE OR TABLE NUMBER AND ORIGINAL SOURCE]
We are requesting non-exclusive rights in this edition and in all forms. It is understood, of course, that full acknowledgment will be given to the source.
Please note that Taylor & Francis are signatories of and respect the spirit of the STM Agreement regarding the free sharing and dissemination of scholarly information.
Your prompt consideration of this request would be greatly appreciated.
Yours faithfully
Abstracts
Structured abstracts are required for all papers, and should be submitted as detailed below, following the title and authors?names and addresses, preceding the main text.
For papers reporting original research, state the primary objective and any hypothesis tested; describe the research design and your reasons for adopting that methodology; state the methods and procedures employed, including where appropriate tools, hardware, software, the selection and number of study areas/subjects, and the central experimental interventions; state the main outcomes and results, including relevant data; and state the conclusions that might be drawn from these data and results, including their implications for further research or application/practice.
For review essays, state the primary objective of the review; the reasoning behind your literature selection; and the way you critically analyse the literature; state the main outcomes and results of your review; and state the conclusions that might be drawn, including their implications for further research or application/practice.
Abstracts should not exceed 200 words.
Notes on style
All authors are asked to take account of the diverse audience of the International Journal of Computer Integrated Manufacturing. Clearly explain梠r avoid the use of梩erms that might be meaningful only to a local or national audience. However, although the International Journal of Computer Integrated Manufacturing does not aspire to be international in the ways that McDonald抯 restaurants or Hilton Hotels are international, papers are accepted that reflect the particularities of each social and cultural system, where appropriate.
Some specific points of style for the text of articles, research reports, case studies, reports, essay reviews and reviews follow.
1. 慤S?is preferred to 慉merican? 慤SA?to 慤nited States? and 慤K?to 慤nited Kingdom?
2. Conservative British, not US, spelling is preferred: colour not color; behaviour (behavioural) not behavior (behavioral); [school] programme not program; [he] practises not practices; centre not center; organization not organisation; analyse not analyze; etc.
3. Single quotation marks rather than double are used unless the 憅uotation is "within" another?
4. Punctuation should follow the British style, e.g. 憅uotation marks precede punctuation?
5. Punctuation of common abbreviations should adhere to the following conventions: 慹.g.? 慽.e.? 慶f.? Note that such abbreviations should not generally be followed by a comma or a (double) point/period.
6. N-rules (? and M-rules (? should preferrably be used where needed in applications on disk if possible, or be clearly indicated in manuscripts by way of either a double or a triple hyphen, (--) or (---), respectively.
7. Upper case characters in headings and references should be used sparingly, e.g. only the first word of paper titles, subheadings and any proper nouns begin upper case; similarly for the titles of papers from journals in the references and elsewhere.
8. All acronyms for national agencies, examinations, etc., should be spelled out the first time they are introduced in text or references. Thereafter the acronym can be used if appropriate, e.g. 慣he work of the Assessment of Performance Unit (APU) in the early 1980s ...?and subsequently, 慣he APU studies of achievement ...? in a reference ?Department of Education and Science [DES] 1989a)?
9. Apostrophes should be used sparingly. Thus, decades should be referred to as follows: 慣he 1980s [not the 1980抯] saw ...? Possessives associated with acronyms (e.g. APU), should be written as follows: 慣he APU抯 findings that ...? but note that the plural is 慉PUs?
10. Brief biographical details of significant national figures should be outlined in the text unless it is quite clear that the person concerned would be known internationally. Some suggested editorial comments in a 憈ypical?text are indicated in the following with square brackets: 慒rom the time of H. E. Armstrong [in the 19th century] to the curriculum development work associated with the Nuffield Foundation [in the 1960s], there has been a shift from constructivism to heurism in the design of [British] science courses?
11. The preferred local (national) usage for ethnic and other minorities should be used in all papers. For the USA, 慉frican-American? 慔ispanic?and 慛ative American?are used, e.g. 慣he African-American presidential candidate, Jesse Jackson...? for the UK, 慉fro-Caribbean?(not 慦est Indian?, etc.
12. Material to be emphasized by italicization in the printed version should preferrably be italicized in the typescript rather than underlined. Please use such emphasis sparingly.
13. When using a word that is, or is asserted to be, a proprietary term or trade mark, authors must use the symbol ?or TM , or alternatively a footnote can be inserted using the following wording.
This article includes a word that is, or is asserted to be, a proprietary term or trade mark. Its inclusion does not imply that it has acquired for legal purposes a non-proprietary or general significance, nor is any other judgement implied concerning its legal status.
14. ??(not 憄er cent? should be used in typescripts.
15. Numbers in text should take the following forms: 300, 3000, 30 000 (not 30,000). Spell out numbers under 10 unless used with a unit of measure, e.g. nine pupils but 9 mm (do not introduce periods with units). For decimals, use the form 0.05 (not .05, ?05 or 0?05).
16. Appendixes should appear before the references section and after any acknowledgments section. The style of the title is shown by the following example.
慉ppendix C: The random network generator?/B>
Figures and tables within appendixes should continue the sequence of numbering from the main body of the text. Sections within appendixes should be numbered, for example, C.1, C.2, ... Equations in appendixes should be numbered, for example, (C 1), (C 2), ... If there is only one appendix, it is referred to as 憈he appendix?and not called 慉ppendix A?
Notes on tables and figures
Artwork submitted for publication will not be returned and will be destroyed after publication, unless requested otherwise. Whilst every care is taken of artwork, neither Editors nor Taylor & Francis shall bear any responsibility or liability for its non-return, loss or damage, nor for any associated costs or compensation. Authors are strongly advised to insure appropriately.
1. Tables and figures should be informative, relevant and visually attractive. The style and spelling of lettering in figures must correspond to the main text of the manuscript. Tables and figures must be referred to in the text and numbered in the order of their appearance. Each table and figure should have a stand-alone descriptive title that explains its purpose without reference to the text; each table column should have an appropriate heading.
2. Tables and figures should be referred to in text as follows: 慺igure 1? 憈able 1? i.e. all lower case except at the beginning of a sentence. 慉s seen in table [or figure] 1 ...?(not Tab., fig. or Fig.).
3. The ideal place at which a table or figure should be inserted in the printed text should be indicated clearly in the manuscript:
慬Insert table 2 about here ]?
4. Figures and tables must be on separate sheets or in separate files and not embedded in the text. Original artwork for figures should be supplied. The scale of figures should allow for reduction to column width (130 mm) or page width (160 mm) or page length (205 mm) if to be placed landscape, but landscape reproduction (i.e. reading from bottom to top of the page) should be avoided. Photographs may be sent as black and white glossy prints or negatives. The use of colour in figures or photographs is discouraged and will incur page charges.
5. Please number each figure on the reverse lightly in pencil.
6. Do not type the caption for a figure on the artwork for that figure. A separate list of figure captions should appear at the end of the manuscript.
Mathematics
Special care should be taken with mathematical scripts, especially subscripts and superscripts and differentiation between the letter 慹ll?and the figure one, and the letter 憃h?and the figure zero. If your keyboard or PC does not have the characters you need, or when using longhand, it is important to differentiate between: K and k; X, x and ?(multiplication); asterisks intended to appear when published as multiplication signs and those intended to remain as asterisks; etc. Special symbols, and others used to stand for symbols not available in the character set of your PC, should be highlighted in the text and explained in the margin. In some cases it is helpful to supply annotated lists of symbols for the guidance of the sub-editor and the typesetter, and/or a 慛omenclature?section preceding the 慖ntroduction?
In both displayed equations and in text, scalar variables must be in italics, with non-variable matter in upright type.
For simple fractions in the text, the solidus ??should be used instead of a horizontal line, care being taken to insert parentheses where necessary to avoid ambiguity. Exceptions are the proper fractions available as single type on keyboards and in character sets (e.g. ? ? ?.
The solidus is not generally used for units: m s- 1 not m/s, but note electrons/s, counts/channel, etc.
Displayed equations referred to in the text should be numbered serially ((1), (2), etc.) on the right-hand side of the page. Short expressions not referred to by any number will usually be incorporated in the text.
Symbols used to represent tensors, matrices, vectors and scalar variables should either be used as required from the character set of the application you are using or marked on hard-copy by underlining with a wavy underline for bold, a straight underline for italic and a straight red underline for sans serif. The following styles are preferred: upright bold sans serif r for tensors, upright bold serif r for vectors and matrices, and mediumface sloping serif r for scalar variables.
Typographical requirements must be clearly indicated at their first occurrence, e.g. Greek, Roman, script, sans serif, bold, italic. Authors will be charged for corrections at proof stage resulting from a failure to do so.
Braces, brackets and parentheses are used in the order {[( )]}, except where mathematical convention dictates otherwise (e.g. square brackets for commutators and anticommutators; braces for the exponent in exponentials).
For units and symbols, the SI system should be used. Where measurements are given in other systems, conversion factors or conversions should be inserted by the author.
Acknowledgments
Any acknowledgments authors wish to make should be included in a separate headed section at the end of the manuscript preceding any appendixes and before the references section. Please do not incorporate acknowledgments into notes or biographical notes.
Book reviews
1. The following is an example of the header material that should appear in all reviews in the order shown (note also the punctuation):
慚anufacturing Automation. By Morris A. Cohen and Uday M. Apte (Chicago: Irwin, 1997), 270 pp, ?9.95 (pbk), ISBN 0-256-14606-3.?
2. Page references within reviews should be given as follows: (p. 337) or (pp. 36?8).
Citations in text
1. References should be cited in the text using the author杁ate (Harvard) system梕.g. ?Melville 1895, Verne 1903)?
2. ?I>Ibid.? ?I>op. cit.?etc. are not used when repeating citations. Simply repeat the original citation verbatim, e.g. (Orwell 1945).
3. Citations should be included at the beginning of quotations (wherever possible) rather than at the end. Thus, for example, 慜rwell (1945: 23) reduces the principles of animalism to seven commandments, namely...?is preferred to 慜rwell reduces the principles of animalism to seven commandments, namely... (Orwell 1945: 23)?
4. Multiple citations within parentheses should be divided by a comma, not a semi-colon, and there should be no use of ?amp;?within such multiple references. References to works published in the same year should be cited as, for example (Smith 1991a, b).
5. Multiple citations within text should be ordered by date, not alphabetically by authors?names, e.g. (Smith 1902, Jones and Bower 1934, Brown 1955, 1958a, b, Green 1995).
6. ?I>et al.?may be used in reference citations within the text when a paper or book has three or more authors, but note that all names should be given in the reference section itself.
7. Page spans in references should be given in full, e.g. 慡edgewick (1935: 102?03; emphasis added) outlines them as follows: ...? not 慡edgewick (1935: 102?; emphasis added) outlines them as follows: ...?
8. In references to a case at law, italicize the names of plaintiffs and defendants, e.g. ?I>Miranda v. Arizona 1974?
References
The International Journal of Computer Integrated Manufacturing uses the following conventions for references.
1. Reference to a book:
Kidd, P. L. 1994, Agile Manufacturing, Forging New Frontiers (New York: Addison- Wesley).
2. Reference to a chapter in a book:
Glover, F., and Laguna, M., 1993, Tabur search. In C. Reeves (ed.), Modern Heuristic Techniques for Combinatorial Problems (Oxford: Blackwell), pp. 70?50.
3. Reference to an article in a journal:
Fransoo, J. C., and Rutten, W. G. M. M., 1994, A typology of production control situations in process industries. International Journal of Operations and Production Management, 14(12), 47?7.
4. Reference to a paper in coference proceedings:
Chang, T.C., and Mitchell, O. R., 1988, QTC梐n integrated design/manu- facturing/inspection system for prismatic parts. Proceedings of the ASME Conference on Computers in Engineering, San Francisco, CA, 12?5 July (Dordrecht: Kluwer), pp. 417?26.
5. Reference to technical reports and unpublished literature:
Lovelace, F., and Pettit, M., 1991, Bin packing with tabu search. Technical Report, University of Colorado, Boulder, CO.
Wortmann, J. C., 1998, Towards an integrated theory for design, production and production management of complex, one-of-a-kind products in the factory of the future. PhD thesis, University of California, Davis, CA.
6. Reference to a newspaper or magazine:
Richards, H., 1996, Republican lite? The Times Higher Education Supplement, 1 November, 16.
7. Reference to an Internet source:
http://acsinfo.acs.org/instruct/instruct.html
梘ive the universal resource locator in full.
8. Reference to a personal communication:
Brannen, J., 1996, Personal communication.
9. Reference to government legislation:
US Congress, Senate Committee on Foreign Relations, 1956, The Mutual Security Act of 1956, 84th Congress, second session, report 2273.
US Congress, House Committee on Banking & Currency, 1945, Bretton Woods Agreements Act: Hearings on HR 3314, 79th Congress, first session, report 452.
United Kingdom Parliament, Committee on the Working of the Monetory System [Ratcliffe Committee], 1960, Principal Memoranda of Evidence, vol. 2, Cmd 1958.
United Nations General Assembly, Secretariat for Economic Affairs, 1951, Methods of Financing Economic Development in Less Developed Countries, report II B 2.
10. Reference to a Standard:
International Standards Organisation, 1994, ISO9002, Quality systems桵odel for quality assurance in production and installation.
Electronic processing
We require the final revised version of your article in both hard-copy (paper) and electronic (disk) forms. In what follows, procedures are set out that will assure we can process your article efficiently. They are divided into three sections.
- A guide for authors using standard word-processing software packages
- A guide for authors using LaTeX mathematical software packages
- A guide for authors using graphics software packages
There are some general rules which apply to all three options:
- these guides do not apply to authors who are submitting an article for consideration and peer review; they apply only to authors whose articles have been reviewed, revised as required, and accepted for publication;
-
- print out your hard-copy (paper) from the disk you are sending; it is essential that the hard-copy printout is identical with the material on the disk; where versions differ, the hard-copy will take precedence. We advise that you maintain back-ups of your files;
- save and send your files on a standard 3.5 inch high density disk (Mac or PC); please do not attempt to send the article via file transfer protocol or e-mail;
- when saving your article onto a disk, please make sure that the files do not exceed a manageable size. Please ensure that figures are saved on a separate disk;
- ensure that files are not saved as read-only;
- virus-check each disk before sending it to the Editor;
- label each disk;
- package disks in such a way as to avoid damage in the post;
- disks are not returnable after publication.
1. A guide for authors using standard word-processing software packages
For the main text of your article, most standard PC or Mac word-processing software packages are acceptable, although we prefer Microsoft Word in a PC format.
Word-processed files should be prepared according to journal style.
Avoid the use of embedded footnotes. For numbered tables, use the table function provided with the word-processing package.
All text should be saved in one file with the complete text (including the title page, abstract, all sections of the body of the paper and the references), followed by numbered tables and the figure captions.
You should send the following to the Editor:
- a 3.5 inch disk containing the final, accepted version of the paper;
- include an ASCII/text-only version on the disk as well as the word-processed version if possible;
- two hard-copy printouts.
Each disk should be clearly labelled with the following information.
1. Journal title.
2. Name of the corresponding author.
3. File names contained on disk
4. Hardware used (PC or Mac).
5. Software used (name and version).
Sample disk label: text
|
Journal title |
|
A.N. Author |
|
article.doc |
|
IBM PC |
|
MS Word for Windows 7.0 |
2. A guide for authors using LaTeX mathematical software packages
Authors who wish to prepare their articles using the LaTeX document preparation system are advised to use article.sty (for LaTeX 2.09) or article.cls (for LaTeX2e).
The use of macros should be kept to an absolute minimum but if any are used they should be gathered together in the file just before the \begin{document} command.
You should send the following to the Editor:
- a 3.5 inch disk containing the final accepted version of the paper;
- the files you send must be text-only (often called ASCII files), with no system-dependent control codes;
- two hard-copy printouts.
Each disk should be clearly labelled with the following information.
1. Journal title.
2. Name of the corresponding author.
3. File names contained on disk.
4. Hardware used (PC or Mac).
5. Software used (name and version).
Sample disk label: LaTeX
|
Journal title |
|
A.N. Author |
|
article.tex
article.sty |
|
IBM PC |
|
PCLaTeX v2.09 |
3. A guide for authors using graphics software packages
We welcome figures on disk, but care and attention to these guidelines are essential as importing graphics packages can often be problematic.
- Figures must be saved on a separate disk from the text.
- Avoid the use of colour and tints for purely aesthetic reasons. Figures should be produced as near to the finished size as possible.
- High quality reproducible hard copy for all line figures (printed out from your electronic files at a minimum of 600 dpi) must be supplied in case the disks are unusable; photographs and transparencies can be accepted as hard copy only. Photocopies will not be accepted.
- All figures must be numbered in the order in which they occur (e.g. figure 1, figure 2). In multi-part figures, each part should be labelled (e.g. figure 1(a), figure 1(b)).
- The figure captions must be saved separately, as part of the file containing the complete text of the paper, and numbered correspondingly.
- The filename for the graphic should be descriptive of the graphic, e.g. Figure1, Figure2a.
- Files should be saved as TIFF (tagged image file format), PostScript or EPS (encapsulated PostScript), containing all the necessary font information and the source file of the application (e.g. CorelDraw/Mac, CorelDraw/PC).
Each disk should be clearly labelled with the following information.
1. Journal title.
2. Name of the corresponding author.
3. Figures contained on disk.
4. Hardware used (PC or Mac).
5. Software used (name and version).
Editorial Board
Editor in Chief:
Professor David J. Williams
Managing Editor:
Dr Stephen T. Newman - Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, Loughborough, Leics, LE11 3TU, UK
North American Editors:
Paul G Ranky - New Jersey Institute of Technology, USA
Paul Kenneth Wright - University of California, Berkeley, USA
Associate Editors:
George Chryssolouris - University of Patras, Greece
P. Pokorny - Technical University of Liberec, Czech Republic
Fran鏾is Vernadat - European Commission, Luxembourg
Reviews Editor:
Shahin Rahimifard - Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, Loughborough, UK
| 
刊名字顺( Alphabetical List of Journals):
返回页首 