期刊名称：INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
The aim of the International Journal of Computational Fluid Dynamics is a continuous and timely dissemination of new and innovative CFD research and developments. The journal is a truly interdisciplinary forum for CFD, and publishes refereed papers on the latest advances in numerical methods in fluid dynamics and their applications to the aeronautrics, hydrodynamics, environmental, and power and process fields. The journal has a distinctive and balanced international contribution, with emphasis on papers dealing with efficient methods to produce accurate predictive numerical tools for flow analysis and design, and those promoting the understanding of the physics of fluid motion. Relevant and innovative practical and industrial applications, as well as those of an interdisciplinary nature, are strongly encouraged.
Instructions to Authors
Click here to check your article status
INTRODUCTION
It is essential that authors prepare their manuscripts according to established specifications. The effectiveness of the search capabilities offered by electronic delivery will depend upon the care used by authors in preparing their manuscripts. Therefore, contributors are strongly encouraged to read these instructions carefully before preparing a manuscript for submission, and to check the manuscript for compliance with these notes before submitting it for publication.
SUBMISSION OF MANUSCRIPTS
(Full Papers and Short Communications)
All manuscripts should be written in English. Manuscripts submitted as hard copy should be typed with double spacing and wide (cm) margins on good quality paper, and submitted in quadruplicate to the appropriate Editor in your region, or to the Editor-in-Chief. In addition, a copy of the paper must always be sent to the Editor-in-Chief. The authors could also suggest the names of up to 6 potential referees with whom they do not maintain a professional relationship.
The length of a full paper should not exceed 20 journal pages (8,000). Short Communications should not exceed 5 journal pages (2,000).
Please ensure that a full postal address (title and position, department, affiliation, civic address, city, state, country and e-mail) for each author is given on the first page of the typescript. Please also separately provide the phone, fax and e-mail number of the author responsible for the coordination of the publication of the paper.
Summary: Each paper requires a Summary of 100-200 words of the significant coverage and findings.
Keywords: Each paper requires up to 10 keywords.
ORIGINALITY AND COPYRIGHT
Submission of a paper to the International Journal of Computational Fluid Dynamics will be taken to imply that it represents original work not previously published that, it is not being considered elsewhere for publication, and that if accepted for publication it will not be published elsewhere in the same form, in any language, without the consent of the Editor in Chief and the Publisher. It is a condition of acceptance by the editor of a typescript for publication that the publishers automatically acquire the international copyright to the typescript.
SECTION HEADINGS
Sections and subsection should be hierarchically numbered in the following style:
1. SECTION HEADING
1.1. Section Subheading
1.1.1. Section sub-sub-heading
FIGURES
All figures should be numbered with consecutive Arabic numbers, have descriptive captions, and be mentioned in the text. Keep figures separate from the text, but indicate an approximate position for each in the margin.
Preparation: Figures submitted must be of a high standard for direct reproduction. Line drawings should be prepared in black (India) ink on white paper or a tracing cloth, with all lettering and symbols included. Alternatively, good sharp photoprints ("glossies") are acceptable. Photographs intended for halftone reproduction must be good glossy original prints, of maximum contrast. Clearly label each figure with author's name and figure number indicate "top" where this is not obvious. Redrawing or retouching of unusable figures will be charged to authors.
Size: Figures should be prepared to fit either into a single column width (75mm) or double column width (160mm) with capital lettering 4mm high to accommodate reduction. Photographs for halftone reproduction should be about twice the desired size.
Color plates: There are a limited number of color pages within the annual page allowance. However, authors should restrict their use of color to situations where it is necessary on scientific, and not merely cosmetic, grounds. In addition, authors may pay to publish color illustrations, but please consult the publisher regarding cost before submission.
EQUATIONS AND FORMULAE
Mathematical notation should be clearly marked and equations should preferably by typewritten, with subscripts and superscripts clearly shown. It si helpful to identify unusual or ambiguous symbols in the margin when they first occur. To simplify typesetting, please use (1) the "exp" form of complex exponential functions. (2) fractional exponents instead of root signs, and (3) the solidus (/) to simplify fractions e.g. exp x1/2 . Please underline all mathematical symbols to be set in italic and put a wavy line under bold symbols. Other letters not marked will be set in roman type.
TABLES
Number tables consecutively with roman numerals, and give each a clear descriptive caption at the top. Avoid the use of vertical rules in tables. Indicate in the margin where the typesetter should place tables.
REFERENCES
References must be indicated in the text by first author and date (in parentheses), e.g. Smith et al. (1992). The full list should be collected at the end of the paper in alphabetical order. Reference style should conform to the following examples:
Smith, S. and Wesson, W. (1996a) Efficient Solvers for High Speed Flows, SIAM J. of Numeri. Anul., 23 217-235.
Smith, S. and Wesson, W. (1996b) Efficient Solvers for High Speed Flows, ASME J. Fluids Eng., 10 101-110.
Smith, S. and Wesson, W. (1996c) Efficient Solvers for High Speed Flows, Proceedings of the 6th Computational Fluid Dynamics Conference, ed. G. Edwards, Gordon and Breach, Montreux, 217-235.
Smith, S. and Wesson, W. (1996) Efficient Solvers for High Speed Flows, A1AA Paper 96-1434, A1AA, 34th Aerospace Sciences meeting, Reno, Nevada.
Smith, S. and Wesson, W. (1996) Efficient Solvers for High Speed Flows, Gordon and Breach, Reading.
It is assumed that with the development of the World Wide Web (WWW), authors and /or the publisher will propose distribution of articles or parts of articles on the WWW. If the author knows the HTTP address of a referenced article on the WWW, this information should be added at the end of the reference. Please use the following style:
[ www http://www.blouk.com/article.htm ]
where http://www.blouk.com/article.htm is the HTTP address.
FOOTNOTES
Authors are encouraged to minimize the use of footnotes. A footnote may include the designation of a corresponding author of paper, current address information for an author (if different from that shown in the affiliation), and traditional footnote content. Information concerning grant support of research should appear in a separate Acknowledgements section at the end of the paper, not in a footnote. Acknowledgements of the assistance of colleagues or similar notes of appreciation also properly belong in an Acknowledgements section, not in footnotes.
Footnotes should be indicated in the text by the following symbols: *(asterisk or star), ?(dagger), ?(double dagger), ?(paragraph mark), ?(section mark), || (parallels), # (number sign). Do not use numerals for footnote call-outs, as they may be mistaken for bibliographical reference call-outs or exponents. Type each footnote at the bottom of the typescript page on which its text call-out appears.
Footnotes within a table should be indicated by the same symbols listed above. Reinitialize symbol sequence within tables. Type footnotes to a table directly beneath the table.
TEXT CALL-OUTS TO FIGURES, TABLES, SECTIONS, SCHEMES
Text call-outs to figures, tables and other elements are the basis for searching articles on electronic delivery. Therefore, proper designation of text call-outs to figures and other elements is essential to the success of electronic delivery. When referring to a figure, table on other element within an article, always call the element by its full name. "See Table 1", "Figure 1 illustrates...", "Refer to Scheme 1". Do not use ambiguous call-outs (for example, "1 illustrates...") that do not clearly donate the element being referred to.
SUBMISSION OF ARTICLES ON DISK
The Publisher welcomes article submission on disk. Instructions for Disk Submission appear in these Instructions for Authors. They may also be obtained from the Journal Editor or the Publisher.
SUBMISSION OF ANIMATION
Animations are limited to a time duration of 30 seconds. Animation should be submitted to the Journal Editor along with the manuscript.
Animations in the following forms (in order of preference) can be accepted from authors:
- Video tape
- AVI or QuickTime files
- A sequence of still images.
The following formats can be accepted:
- all uncompressed formats widely used on PC, Mac and UNIX
- JPEG for colored and compressed images
- TIFF with a group IV compression for black and white compressed images
- FLI and FLC format from AutoDesk.
Authors who submit animations are requested to provide the following information:
- Video tape - format used.
- AVI or QuickTime files - version used, and system used for disk file creation.
- Sequence of still images - format used, version and system used for disk file creation.
Authors who are unable to supply video tape, AVI or QuickTime files may provide the publisher with a set of sequential still images. Note that an animated sequence will consist of 13 to 15 still images per second of animation; e.g., if an animated sequence is 10 seconds in duration, it is made up of 130 images. Authors who are unable to submit in any of the above-mentioned formats are advised to contact the publisher to discuss other options with the Publisher prior to submission.
Animation should be mentioned in the text. Indicate an approximate location for the animation call-out in the margin.
PROOFS
Authors will receive page proofs (including fugures) by airmail for correction. These must be reviewed very carefully and returned to the Editor in Chief within 48 hours of receipt. Please ensure that full postal address, plus phone, fax, and e-mail numbers, where available, are given on the first page of the typescript, so that proofs are not delayed in the post. Author's alterations in excess of 10% of the original composition cost will be charged to authors.
REPRINTS
Fifty free reprints will be provided to the corresponding author of each paper. Additional reprints may be ordered by completing the appropriate form sent with proofs.
PAGE CHARGES
There are no page charges to individuals or institutions.
Editorial Board
|
Editor-in-Chief:
Professor W G Habashi - Director, CFD Laboratory, Department of Mechanical Engineering, McGill University, 688 Sherbrooke Street West, 7th Floor, Montreal Qc, Canada, H3A 2S6
Editors:
Professor A Hamed - Chairman, Department of Aerospace Engineering, University of Cincinnati, Mail Location 70, Cincinnati, Ohio 45221-0070, USA
Dr L A Povinelli - Chief Scientist, Turbomachinery & Propulsion Systems and Director, Institute for Computational Mechanics in Propulsion, NASA - Glenn Research Center, M/S 5-3, 21000 Brookpark Road, Cleveland, Ohio 44135, USA
Professor Ch Hirsch - Chairman, Department of Fluid Mechanics, Vrije Universiteit Brussel, Pleinlaan 2, B-1050 Brussels, Belgium
Professor M Kawahara - Chairman, Department of Civil Engineering, Chuo University, Kasuga 1-chome, 13-27, Bunkyo-ku, Tokyo 112, Japan
Advisory Board:
Professor I Imai - Emeritus Professor, Kogakuin University, Tokyo, Japan
Professor S F Shen - Cornell University, New York, USA
Academician Yu I Shokin - Russian Academy of Sciences, Novosibirsk, Russia
Professor O C Zienkiewicz - University College Swansea, Swansea, Wales, UK
Editorial Board:
Professor R K Agarwal - Washington University in St. Louis, USA
Professor H U Akay - Purdue School of Engineering & Technology, Indiana, USA
Professor G de Vahl Davis - University of New South Wales, Kensington, Australia
Professor M Fortin - Universit?Laval, Quebec, Canada
Professor P Garabedian - Courant Institute of Mathematical Sciences, New York, USA
Professor S K Godunov - Russian Academy of Sciences, Novosibirsk, Russia
Professor M D Gunzburger - Iowa State University, Iowa, USA
Dr J H鋟ser - Center of Logistics and Expert Systems, Braunschweig, Germany
Professor Dr-Ing E H Hirschel - Daimler-Chrysler AG, M黱chen, Germany
Professor S Huili - Northwestern Polytechnic University, Shanxi, People's Republic of China
Professor M Ja Ivanov - Central Institute of Aviation Motors, Moscow, Russia
Professor B Mohammadi - Universit?Montpellier I, Montpellier, France
Professor K Morgan - University College of Swansea, Swansea, Wales, UK
Professor M Napolitano - Universit?degli Studi di Bari, Bari, Italy
Professor R A Nicolaides - Carnegie-Mellon University, Pennsylvania, USA
Professor J Peraire - Massachusetts Institute of Technology, Massachusetts, USA
Professor A Pollard - Queen's University, Ontario, Canada
Dr M D Salas - NASA-Langley Research Center, Virginia, USA
Dr. W Schmidt - Daimler-Benz AG, Stuttgart, Germany |
|
刊名字顺( Alphabetical List of Journals):
返回页首 