A|B|C|D|E|F|G|H|I|J|K|L|M|N|O|P|Q|R|S|T|U|V|W|X|Y|Z|ALL

  检 索： 期刊名称 ISSN         高级检索

期刊名称：INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS ISSN： 1383-5416 出版频率： Quarterly 出版社： IOS PRESS, NIEUWE HEMWEG 6B, AMSTERDAM, NETHERLANDS, 1013 BG   出版社网址： http://www.iospress.nl 期刊网址： http://www.iospress.nl/site/navfr/navframe2.html 影响因子： 0.255(2008) 主题范畴： MECHANICS;    PHYSICS, APPLIED;    ENGINEERING, ELECTRICAL & ELECTRONIC 期刊简介(About the journal)    投稿须知(Instructions to Authors)    编辑部信息(Editorial Board)    About the journal The aim of the International Journal of Applied Electromagnetics and Mechanics is to contribute to intersciences coupling applied electromagnetics, mechanics and materials. The journal also intends to stimulate the further development of current technology in industry. The main subjects covered by the journal are: Physics and mechanics of electromagnetic materials and devices; Computational electromagnetic in materials and devices; and Applications of electromagnetic fields and forces. The three interrelated key subjects - materials, electromagnetics and mechanics - include the following aspects: control, micromachines, intelligent structure, inverse problem, eddy current analysis, electromagnetic NDE, magnetic materials, magnetoelastic effects in materials, biomagnetism, magnetosolid mechanics, magnetic levitations, applied physics of superconductors, superconducting magnet technology, superconducting propulsion system, nuclear fusion reactor components and wave propagation in electromagnetic fields. The editorial policy is to combine information and experience from both the latest high technology fields and the well-established technologies within applied electromagnetics and mechanics. The editors hope to furtherly enhance the theoretical framework for our field from the interaction of old and new concepts. In order to assist readers to quickly grasp the current status of research in a specific area of applied electromagnetics and mechanics, both contributed and invited papers are published in special and thematic issues as well as regular issues. Instructions to Authors Submission of manuscripts Authors are requested to submit 3 copies of their manuscript as well as a floppy disk containing the electronic files of the paper to the Editor in Chief or to any member of the editorial board. It is important that the file on disk and the printout are identical. Editor-in-chief: Professor, Dr. Eng.Toshiyuki Takagi Advanced Systems Evaluation Laboratory Institute of Fluid Science, Tohoku University Katahira 2-1-1, Aoba-ku, Sendai 980-8577 Japan Tel.& Fax: +81 22 217 5248 Electronic files The following electronic files are required: , LaTeX (if using LaTeX, please use the standard Article.sty file as style file) Colour figures It is possible to have figures printed in colour, provided the cost of their reproduction is paid for by the author. Please always send the original hard copy of colour figures. Preparation of manuscripts Organization of the paper and style of presentation Manuscripts must be written in English. Authors whose native language is not English are recommended to seek the advice of a native English speaker, if possible, before submitting their manuscripts. Manuscripts should be typed on one side of the paper only, with wide margins and double spacing throughout, including the abstract, footnotes and references. Every page of the manuscript, including the title page, references, tables, etc., should be numbered. However, in the text no reference should be made to page numbers; if necessary, one may refer to sections. Try to avoid the excessive use of italics and bold face. Manuscripts should be organized in the following order: Title page Introduction Body of text (divided by subheadings) Conclusion Acknowledgements References Tables Figure captions Figures. Headings and subheadings should be numbered and typed on a separate line, without indentation. SI units should be used, i.e., the units based on the metre, kilogramme, second, etc. Title page The title page should provide the following information: Title (should be clear, descriptive and not too long) Name(s) of author(s); please indicate who is the corresponding author Full affiliation(s) Present address of author(s), if different from affiliation Complete address of corresponding author, including tel. no., fax no. and e-mail address Abstract The abstract should be clear, descriptive, self-explanatory and not longer than 200 words. It should also be suitable for publication in abstracting services. Tables Tables should be numbered according to their sequence in the text. The text should include references to all tables. Each table should be provided on a separate page of the manuscript. Tables should never be included in the text. Each table should have a brief and self-explanatory title. Column headings should be brief, but sufficiently explanatory. Standard abbreviations of units of measurement should be added between parentheses. Vertical lines should not be used to separate columns. Leave some extra space between the columns instead. Any explanations essential to the understanding of the table should be given in footnotes at the bottom of the table. Figures Figures should be numbered according to their sequence in the text. The text should include references to all figures. Each figure should be provided on a separate sheet. Figures should not be included in the text. Colour figures can be included, provided the cost of their reproduction is paid for by the author. For the file formats of the figures please take the following into account: line art should be have a minimum resolution of 600 dpi, save as EPS or TIFF grayscales (incl photos) should have a minimum resolution of 300 dpi (no lettering), or 500 dpi (when there is lettering); save as tiff do not save figures as JPEG, this format may lose information in the process do not use figures taken from the Internet, the resolution will be too low for printing do not use colours in your figures if they should be printed in black & white, because this will reduce the print quality (note that in software often the default is colour, you should change the settings) for figures that should be printed in colour, please send both a hardcopy (to be used for the paper publication), and a CMYK encoded EPS or TIFF (used for the electronic publication) Each figure should be identified by its number. If necessary, indicate top or bottom of figure. Figures should be designed with the format of the page of the journal in mind. They should be of such a size as to allow a reduction of 50 %. On maps and other figures where a scale is needed, use bar scales rather than numerical ones, i.e., do not use scales of the type 1:10,000. This avoids problems if the figures need to be reduced. Each figure should have a self-explanatory caption. The captions to all figures should be typed on a separate sheet of the manuscript. Photographs are only acceptable if they have good contrast and intensity. References For citations in the text numbers between square brackets should be used. All publications cited in the text should be presented in a list of references following the text of the manuscript. For citations in the text numbers between square brackets should be used. All publications cited in the text should be presented in a list of references following the text of the manuscript. References should be listed alphabetically in the following style: [1] B. Newman and E.T. Liu, Perspective on BRCA1, Breast Disease 10 (1998), 3-10. [2] D.F. Pilkey, Happy conservation laws, in: Neural Stresses, J. Frost, ed., Controlled Press, Georgia, 1995, pp. 332-391. [3] E. Wilson, Active vibration analysis of thin-walled beams, Ph.D. Dissertation, University of Virginia, 1991. Footnotes Footnotes should only be used if absolutely essential. In most cases it is possible to incorporate the information in the text. If used, they should be numbered in the text, indicated by superscript numbers and kept as short as possible. Copyright Authors submitting a manuscript do so on the understanding that if their paper is accepted for publication, copyright in the article, including the right to reproduce the article in all forms and media, shall be assigned exclusively to the Publisher. Quoting from other publications An author, when quoting from someone else's work or when considering reproducing a figures or table from a book or journal article, should make sure that he is not infringing a copyright. Although in general an author may quote from other published works, he should obtain permission from the holder of the copyright if he wishes to make substantial extracts or to reproduce tables, plates or other figures. If the copyright holder is not the author of the quoted or reproduced material, it is recommended that the permission of the author should also be sought. Material in unpublished letters and manuscripts is also protected and must not be published unless permission has been obtained. Submission of a paper will be interpreted as a statement that the author has obtained all the necessary permission. A suitable acknowledgement of any borrowed material must always be made. Proofs The corresponding author is asked to check the galley proofs (the publisher will execute a cursory check only). Corrections other than printer's errors, however, should be avoided. Costs arising from such corrections will be charged to the authors. How to order offprints, reprints, pdf, extra journals, books The corresponding author of a contribution to the journal is entitled to receive 1 copy of the journal free of charge. An order form for offprints, additional journals or a pdf file will be provided along with the galley proofs. If you wish to order reprints of an earlier published article, please contact the publisher for a quotation. IOS Press, Fax: +31 20 620 3419. E-mail: editorial@iospress.nl. An author is entitled to 25 % discount on books. See Author's discount (25%) on all IOS Press book publications. Editorial Board Founding Editor K. Miya Keio University, Japan Editor-in-Chief T. Takagi Advanced Systems Evaluation Laboratory Institute of Fluid Science Tohoku University Katahira 2-1-1, Aoba-ku Sendai 980-8577, Japan Tel/Fax: +81 22 217 5248 E-mail: t.takagi@ieee.org Regional Editors G.A. Maugin Modelisation en Mecanique Université Pierre et Marie Curie Tour 66, 4, Place Jussieu 75252 Paris Cedex 05 France E-mail: gam@ccr.jussieu.fr Joel Pouget Laboratoire d’Etudes Mechaniques des Assemblages (CNRS-FRE 2481) Universite de Versailles/Saint-Quentin-en-Yvelines B. Descartes 45 Avenue des Etats-Unis 78035 Versailles Cex France Tel: +33 1 39 25 42 09 E-mail : joel.pouget@meca.uvsq.fr Call for Papers Information can be obtained from: editorial@iospress.nl