期刊名称：INTERACTING WITH COMPUTERS
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
acts as an international forum for the discussion of HCI issues
fosters communication between academic researchers and practitioners
encourages the flow of information across the boundaries of its contributing disciplines
stimulates ideas and provokes widespread discussion with a forward-looking perspective
Topics covered include:
systems and dialogue design
evaluation techniques
user interface design
HCI tools, techniques and methodologies
empirical evaluations
users and user modelling
new research paradigms
design theory, process and methodology
organizational and societal issues
intelligent systems
training and education applications
emerging technologies
hypertext and hypermedia
computer-supported co-operative work
Instructions to Authors
It is hoped that this list will be useful during the final checking of an article prior to sending it to the journal's editor for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following items are present:
One author designated as corresponding author:
E-mail address
Full postal address
Telephone and fax numbers
Keywords
All figure captions
All tables (including title, description, footnotes)
In case of a hardcopy submission, please also make sure that:
Disk is enclosed
The electronic version and the hardcopy of the manuscript are identical
Disk has been labelled with
-article details (first author, first words of title)
-file name(s)
-media format (e.g., PC, Mac)
-file format (e.g., Word, LaTeX)
Of all artwork, high quality originals are provided
Further considerations:
Manuscript has been "spell checked"
References are in the correct format for this journal
All references mentioned in the Reference list are cited in the text, and vice versa
Permission has been obtained for use of copyrighted material from other sources (including the Web)
Colour figures are clearly marked as being intended for colour reproduction or to be reproduced in black-and-white
For any further information please contact the Author Support Department at authorsupport@elsevier.com
Submission Address
D. Murray, Independent Consultant
59, Cambridge Road
Teddington
Middlesex TW11 8DT
UK
Email: dianne@city.ac.uk
Submission of Articles
General
It is essential to give a fax number and e-mail address when submitting a manuscript. Articles must be written in good English.
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher.
Upon acceptance of an article, authors will be asked to transfer copyright (for more information on copyright, see http://authors.elsevier.com). This transfer will ensure the widest possible dissemination of information. A letter will be sent to the corresponding author confirming receipt of the manuscript. A form facilitating transfer of copyright will be provided.
If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: contact Elsevier Global Rights Department, P.O. Box 800, Oxford, OX5 1DX, UK; phone: (+44) 1865 843830, fax: (+44) 1865 853333, e-mail: permissions@elsevier.com
Submission to the journal prior to acceptance
Authors can upload their article as a LaTeX, Microsoft? (MS) Word?, WordPerfect?, PostScript or Adobe? Acrobat? PDF document via the "Author Gateway" page of this journal (http://authors.elsevier.com/journal/intcom), where authors will also find a detailed description on its use. The system generates an Adobe Acrobat PDF version of the article which is used for the reviewing process. It is crucial that all graphical and tabular elements be placed within the text, so that the file is suitable for reviewing. Authors, Reviewers and Editors send and receive all correspondence by e-mail and no paper correspondence is necessary.
Note: compuscripts submitted are converted into PDF for the review process but may need to be edited after acceptance to follow journal standards. For this an "editable" file format is necessary. See the section on "Electronic format requirements for accepted articles" and the further general instructions on how to prepare an article below.
Alternatively, authors can send an electronic version of their article by e-mail to the address given in the "Submission Address" above. This electronic version will be used for the reviewing process. Authors, Reviewers and Editors send and receive all correspondence by e-mail and no paper correspondence is necessary.
Note: electronic articles submitted for the review process may need to be edited after acceptance to follow journal standards. For this an "eiditable" file format is necessary. See the section on "Electronic format requirements for accepted articles" and the further general instructions on how to prepare an article below.
Electronic format requirements for accepted articles
General points We accept most wordprocessing formats, but Word, WordPerfect or LaTeX is preferred. An electronic version of the text should be submitted together with the final hardcopy of the manuscript. The electronic version must match the hardcopy exactly. Always keep a backup copy of the electronic file for reference and safety. Label storage media with the corresponding author's name, journal title, and software used. Save your files using the default extension of the program used. No changes to the accepted version are permissible without the explicit approval of the Editor. Electronic files can be stored on 3? inch diskette, ZIP-disk or CD (either MS-DOS or Macintosh).
Wordprocessor documents
It is important that the file be saved in the native format of the wordprocessor used. The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. Do not embed ?graphically designed' equations or tables, but prepare these using the wordprocessor's facility. When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also the Author Gateway's Quickguide: http://authors.elsevier.com). Do not import the figures into the text file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript. See also the section on Preparation of electronic illustrations.
To avoid unnecessary errors you are strongly advised to use the ?spellchecker' function of your wordprocessor.
LaTeX documents
If you submit a suitable LaTeX file, and your articles gets accepted, proofs will be produced without rekeying the text. The article should preferably be written using Elsevier's document class ?elsart', or alternatively the standard document class ?article'.
The Elsevier LaTeX package (including detailed instructions for LaTeX preparation) can be obtained from the Author Gateway's Quickguide: http://authors.elsevier.com. It consists of the files: elsart.cls (use this file if you are using LaTeX2e, the current version of LaTeX), elsart.sty and elsart12.sty (use these two files if you are using LaTeX2.09, the previous version of LaTeX), guidelines for users of elsart, a template file for quick start, and the instruction booklet "Preparing articles with LaTeX".
Although Elsevier can process most wordprocessor file formats, should your electronic file prove to be unusable, the article will be typeset from the hardcopy printout.
Preparation of text
Presentation of manuscript
General
Please write your text in good English American or Briish usage is accepted, but not a mixture of these). Italics are not to be used for expressions of latin origin, for example, in vivo, et al., per se. Use decimal points (not commas); use a space for thousands (10 000 and above).
Presentation of the manuscript
In case of a hardcopy submission, please print the entire manuscript on one side of the paper only, using double spacing and wide (3 cm) margins. (Avoid full justification, i.e., do not use a constant right-hand margin.) Ensure that each new paragraph is clearly indicated. Present tables and figure legends on separate pages at the end of the manuscript. If possible, consult a recent issue of the journal to become familiar with layout and conventions. Number all pages consecutively.
Provide the following data on the title page (in the order given).
Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each author.
Corresponding author. Clearly indicate who is willing to handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.
Present / permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a ?Present address' (or ?Permanent address') may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract. Abstracts are crucial for confirming the reader's intention to read a paper. They should provide an extremely brief overview of the issues addressed, the practical consequences of the work are made explicit in the abstract. An abstract is often presented separate from the article, so it must be able to stand alone. The abstract should be between 100 and 150 words in length. References should be avoided in the abstract, but if essential, they must be cited in full, without reference to the reference list.
Keywords. Immediately after the abstract, provide about six keywords, avoiding general and plural terms and multiple concepts (avoid, for example, ?and', ?of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. Please list the most important and general appearing keywords at the beginning of the list. Keywords will be used for indexing purposes.
Executive Summary. Papers in excess of 8,000 words should providean executive summary. This should follow the same structure and summarise its full contents. It should be provided in addition to an abstract. The purpose of the executive summary is to provide a synopsis of the paper for those readers who have neither the time nor the inclination to read the complete paper and thus its role is different from that of the abstract. Executive summaries should be between 500 and 1500 words in length.
Abbreviations. Define abbreviations and symbols that are not standard in this field at their first occurrence in the article: in the abstract but also in the main text after it. Ensure consistency of abbreviations throughout the article.
Non-English Notations. It is likely that some authors will need to include mathematical or logical expressions in their paper. All use of such notations should be fully supported by prose descriptions as some readers will have difficulty with such representations. You may wish to include computer programs or parts of programs in your paper. Please consider submitting these as complimentary material. As many readers will not be familiar with a particular language or language variat, you should consider using a readily redable pseudocode where possible. With all these notational forms a glossary of terms, which defines the notation, should be included. Acknowledgements. Collate acknowledgements in a separate section at the end of the article and do not, therefore, include them on the title page, as a footnote to the title or otherwise.
Arrangement of the article
Subdivision of the article. Please consider using sections, particularly for providing a clearlyDivide your article in the simplest way possible, consistent with clarity. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ?), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to ?the text.' Any subsection may be given a brief heading. Each heading should appear on its own separate line.
The text should usually follow the standard sequence of Introduction, Method, Results and Discussion. Detailed mathematical discussion should be placed in an appendix.
Appendices. If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: (Eq. A.1), (Eq. A.2), etc.; in a subsequent appendix, (Eq. B.1) and so forth.
Acknowledgements. Place acknowledgements, including information on grants received, before the references, in a separate section, and not as a footnote on the title page.
References. See separate section, below.
Figure legends, tables, figures, schemes. Present these, in this order, at the end of the article. They are described in more detail below. High-resolution graphics files must always be provided separate from the main text file (see Preparation of illustrations).
Text graphics. Present incidental graphics not suitable for mention as figures, plates or schemes at the end of the article and number them ?Graphic 1', etc. Their precise position in the text can then be defined similarly (both on the manuscript and in the file). See further under the section, Preparation of illustrations. If you are working with LaTeX and have such features embedded in the text, these can be left, but such embedding should not be done specifically for publishing purposes. Further, high-resolution graphics files must be provided separately (see Preparation of illustrations).
Specific remarks
Mathematical formulae. Present simple formulae in the line of normal text where possible. In principle, variables are to be presented in italics. Use the solidus (/) instead of a horizontal line, e.g., Xp/Ym rather than
Xp
Ym
Powers of e are often more conveniently denoted by exp.
Number consecutively any equations that have to be displayed separate from the text (if referred to explicitly in the text).
Footnotes. Footnotes should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves on a separate sheet at the end of the article. Do not include footnotes in the Reference list.
Table footnotes. Indicate each footnote in a table with a superscript lowercase letter.
Tables. Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
Nomenclature and units. Follow internationally accepted rules and conventions: use the international system of units (SI). If other quantities are mentioned, give their equivalent in SI.
Preparation of supplementary data. Elsevier now accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional possibilities to publish supporting applications, movies, animation sequences, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier web products, including ScienceDirect: http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please ensure that data is provided in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our Author Gateway at http://authors.elsevier.com.
Files can be stored on 3? inch diskette, ZIP-disk or CD (either MS-DOS or Macintosh). This journal offers electronic submission services and supplementary data files can be uploaded via the Author Gateway page of this journal via http://authors.elsevier.com.
References
References can be an important part of a paper, as they place a paper in its historical context. It is possible to either under- oe over-reference and a balance between the two needs to be struck. You should be wary of over-citing your own work relative to the work of others. References should never substitute for explanation and there should be little loss of immediate comprehension in a paper if they were removed. Wherever possible you should cite publicly available work readily available from most libraries. In the body of the paper, references should be made by using an identifiable name or names. Where there are more than three names associated with a reference, these can be abbreviated by the use of the first name followed by 'et al'. Where there are multiple references to an author within the same year the date should be followed by the letters 'a', 'b', etc. Multiple references should be separated by semicolons. In the reference section, at the end of the paper, full references should be provided to facilitate readers obtaining them.
Citations in the text: Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications should not be in the reference list, but may be mentioned in the text. Citation of a reference as ?in press' implies that the item has been accepted for publication and a copy of the title page of the relevant article must be submitted.
Citing and listing of web references. As a minimum, the full URL should be given. Any further information, if known (author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
Reference style
Text: All citations should refer to:
1. Single author: the author's name (without initials, unless there is ambiguity) and the year of publication;
2. Two authors: both authors' names and the year of publication;
3. Three or more authors: first authors' name followed by 'et al.' and the year of publication.
Citations may be made directly (or parenthetically). Groups of references should be listed first alphabetically, the chronologically.
Example: "as demonstrated (Allan, 1996a, 1996b, 1999; Allan and Jones, 1995). Kramer et al. (2000) have recently shown..."
List: References should be arranged first alphabetically and the further sorted chronologically if necessary. More than one reference from the same author(s) in the same year must be identified by the letters "a", "b", "c", etc., placed after the year of publication.
Examples:
Reference to a journal publication:
[1] J. van der Geer, J.A.J. Hanraads, R.A. Lupton, The art of writing a scientific article, J. Sci. Commun. 163 (2000) 51-59.
Reference to a book:
[2] W. Strunk Jr., E.B. White, The Elements of Style, third ed., Macmillan, New York, 1979.
Reference to a chapter in an edited book:
[3] G.R. Mettam, L.B. Adams, How to prepare an electronic version of your article, in: B.S. Jones, R.Z. Smith (Eds.), Introduction to the Electronic Age, E-Publishing Inc., New York, 1999, pp. 281-304.
Preparation of illustrations
Preparation of electronic illustrations
Submitting your artwork in an electronic format helps us to produce your work to the best possible standards, ensuring accuracy, clarity and a high level of detail.
General points
Always supply high-quality printouts of your artwork, in case conversion of the electronic artwork is problematic.
Make sure you use uniform lettering and sizing of your original artwork.
Save text in illustrations as "graphics" or enclose the font.
Only use the following fonts in your illustrations: Arial, Courier, Helvetica, Times, Symbol.
Number the illustrations according to their sequence in the text.
Use a logical naming convention for your artwork files, and supply a separate listing of the files and the software used.
Provide all illustrations as separate files and as hardcopy printouts on separate sheets.
Provide captions to illustrations separately.
Produce images near to the desired size of the printed version.
Files can be stored on 3? inch diskette, ZIP-disk or CD (either MS-DOS or Macintosh). This journal offers electronic submission services and graphic files can be uploaded via the Author Gateway page of this journal via http://authors.elsevier.com.
A detailed guide on electronic artwork is available on our website:
http://authors.elsevier.com/artwork
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless of the application used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats (Note the resolution requirements for line drawings, halftones, and line/halftone combinations given below.):
EPS: Vector drawings. Embed the font or save the text as "graphics".
TIFF: Colour or greyscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (colour or greyscale): a minimum of 500 dpi is required.
DOC, XLS or PPT: If your electronic artwork is created in any of these Microsoft Office applications please supply "as is".
Please do not:
Supply embedded graphics in your wordprocessor (spreadsheet, presentation) document;
Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
Supply files that are too low in resolution;
Submit graphics that are disproportionately large for the content.
Non-electronic illustrations
If you provide non-electronic illustrations, please provide all of them as high-quality printouts, suitable for reproduction (which may include reduction) without retouching. Number illustrations consecutively in the order in which they are referred to in the text. They should accompany the manuscript, but should not be included within the text. Clearly mark all illustrations on the back (or - in case of line drawings - on the lower front side) with the figure number and the author's name and, in cases of ambiguity, the correct orientation. Mark the appropriate position of a figure in the article
Captions
Ensure that each illustration has a caption. Supply captions on a separate sheet, not attached to the figure. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Line drawings
Supply high-quality printouts on white paper produced with black ink. The lettering and symbols, as well as other details, should have proportionate dimensions, so as not to become illegible or unclear after possible reduction; in general, the figures should be designed for a reduction factor of two to three. The degree of reduction will be determined by the Publisher. Illustrations will not be enlarged. Consider the page format of the journal when designing the illustrations.
Photocopies are not suitable for reproduction. Do not use any type of shading on computer-generated illustrations.
Photographs (halftones)
Please supply original photographs for reproduction, printed on glossy paper, very sharp and with good contrast. Remove non-essential areas of a photograph. Do not mount photographs unless they form part of a composite figure. Where necessary, insert a scale bar in the illustration (not below it), as opposed to giving a magnification factor in the legend.
Note that photocopies of photographs are not acceptable.
Colour illustrations
Submit colour illustrations as original photographs, high-quality computer prints or transparencies, close to the size expected in publication, or as 35 mm slides. Polaroid colour prints are not suitable. If, together with your accepted article, you submit usable colour figures then Elsevier will ensure, at no additional charge, that these figures will appear in colour on the web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in colour in the printed version. For colour reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. For further information on the preparation of electronic artwork, please see http://authors.elsevier.com/artwork
Please note: Because of technical complications which can arise by converting colour figures to ?grey scale' (for the printed version should you not opt for colour in print) please submit in addition usable black and white prints corresponding to all the colour illustrations.
Proofs
When your manuscript is received by the Publisher it is considered to be it its final form. Proofs are not to be regarded as 'drafts'.
One set of page proofs will be sent to the corresponding author, to be checked for typesetting/editing. No changes in, or additions to, the accepted (and subsequently edited) manuscript will be allowed at this stage. Proofreading is solely your responsibility.
A form with queries from the copyeditor may accompany your proofs. Please answer all queries and make any corrections or additions required.
Elsevier will do everything possible to get your article corrected and published as quickly and accurately as possible. In order to do this we need your help. When you receive the proof of your article for correction, it is important to ensure that all of your corrections are sent back to us in one communication. Subsequent corrections will not be possible, so please ensure your first sending is complete. Note that this does not mean you have any less time to make your corrections, just that only one set of corrections will be accepted.Commentaries
One of the goals of Interacting with Computers is to foster dialogue between those working in HCI. Brief commentaries on published papers, and replies from the authors, are strongly encouraged and will normally appear in the following issue of the journal. Interacting with Computers is also prepared to publish papers where the referees agree about the quality of the submission but where some aspects of the work is contentious of 'risky' and goes against prevailing orthodoxy. The referees may publish a commentary paper immediately after such a paper. In such cases the author has a right to reply. Used judiciously, this approach may illuminate areas of controversy that currently exist either in the theory or, or approach to HCI issues.
Failures
Surveys of the potential readership of Interacting with Computers suggest that one of the needs of the HCI community is for a forum to enable publication of papers which fail to replicate previously reported results or to support claims made by systems manufacturers. Traditionally such papers are very difficult to publish but this journal is prepared to seriously consider submissions in this category. However, much care is required in the preparation of such papers - they must no be libellous. You are recommended to phrase claims carefully and to make extremely clear the evidence on which they are based.
Names and Addresses of all Authors
On a separate sheet you should provide name(s) and affiliation(s) as they are to appear at the beginning of the paper. Contact details must be on the same sheet. These should include the full postal address, telephone numbers, facsimile numbers and any electronic mail addresses. Submissions will initially be refereed blind, so your name should not appear elsewhere.
Title
Titles are an extremely important part of a paper. If they are not attractive and informative then readers may not look at the paper. Titles should thus be adequately descriptive while still being succinct.
Abstract
Abstracts are crucial for confirming a reader's intentions to read a paper. They should provide an extremely brief overview of the issues addressed, the approach adopted and the conclusions drawn. It is particularly important that the practical consequences of the work are made explicit in the Abstract. This should be between 100 and 150 words in length.
Keywords
A list of about six keywords of phrases should be provided, the most important and general appearing at the beginning of the list.
Executive Summary
Papers in excess of 8,000 words should provide an executive summary. This should follow the same structure as the paper and summarise its full contents. It should be provided in addition to an abstract. The purpose of the executive summary is to provide a synopsis of the paper for those readers who have neither the time nor the inclination to read the complete paper and thus its role is different from that of the abstract. Executive summaries should be between 500 and 1500 words in length.
The Paper
The style of the paper will, of course, be mainly determined by its contents. You should consider using sections, particularly for providing a clearly delineated introduction and conclusion. No more than three levels of section should be used and they should be informatively titled rather than numbered.
References
References can be an important part of a paper as they place a paper in its historical context. It is possible to either under-or over-reference and a balance between the two needs to be struck. You should be wary of over-citing your own work relative to the work of others. References should never substitute for explanation and there should be little loss of immediate comprehension in a paper if they were removed. Wherever possible you should cite publicly available work readily available from most libraries. In the body of the paper, references should be made by using an identifiable name or names. On the first appearance the year, in parentheses, should also be supplied. Where there are more than three names associated with a reference these can be abbreviated by the use of the first name followed by 'et al'. Where there are multiple references to an author within the same year the date should be followed by the letters 'a', 'b', etc. Multiple references should be separated by semicolons. In the reference section, at the end of the paper, full references should be provided to facilitate readers obtaining them.
Journal references should follow the style:
names(s); date; reference title; journal title; (volume number; section number); page numbers.
Book chapters and papers in conference proceedings should follow the style:
name(s); (year); reference title; book/proceedings title;
name of editor(s), (if appropriate); chapter number, (if appropriate); page numbers; publisher.Here you can find more information on Electronic Artwork
Figures and Photographs
You are encouraged to use figures, diagrams, tables and black and white photographs where appropriate. For the first submission these may be included separately and their approximate location marked in the main body of the paper. The publishers may choose to have figures redrawn to fit house style. All figures must be clearly numbered, titled and bear an appropriate, descriptive legend. It is crucial that the axes of graphs are clearly labelled and the traditional conventions concerning graphs observed. There is some capability for publishing colour photographic material. This, however, is extremely expensive and colour photographs will only be published in colour where essential. Colour material will not appear with the rest of the paper but in a separate colour plate section.
Non-English Notations
It is likely that some authors will need to include mathematical of logical expressions in their paper. All use of such notations should be fully supported by prose descriptions as some readers will have difficulty with such representations. You may wish to include computer programs or parts of programs in your paper. The problems of typesetting computer programs are notorious and wherever possible they should be supplied in a camera-ready form so that they can be treated as artwork. As many readers will not be familiar with a particular language or language variant, you should consider using a readily readable pseudocode where possible. With all these notational forms a glossary of terms which defines the notation should be included.
Refereeing Process
The SEB member responsible for your submission will initially appoint at least two referees who will not know your identity. Referees are instructed to consider both intellectual content and style, and the general suitability of the paper. The SEB member, after discussions with the SEB Chair and the Editors, will reply directly to you about the editorial decision. Generally papers will fall into three categories:
acceptance for publishing
rejection
recommendations to develop the submission further.
Editorial Board
General Editor:
D. Murray, (Independent Consultant) 59 Cambridge Road, Teddington, Middlesex TW11 8DT, UK
Email:dianne@city.ac.uk
Deputy Editor:
G. Cockton, University of Sunderland, School of Computing, Engineering and Technology, PO Box 299, Sunderland, SR6 0YN, UK.
Email:Gilbert.Cockton@sund.ac.uk
Special Issues Editor
D.L. Day, Consultant, California, USA
Email:d.day@acm.org
Editor Emeritus
D. Diaper, Bournemouth University, UK
Applications Special Editorial Board:
R. Brooks, Rockwell Software, USA
D. Browne, Corporate Solutions Consulting (UK) Ltd., UK
C. Campbell, The Usability Company, UK
D. Caulton, Microsoft Corporation, USA
E. Churchill, FX Palo Alto Laboratory, Inc., USA
J. Earthy, Lloyd's Register, UK
R. Ennals, Kingston Business School, Kingston University, UK
D. Jennings, David Jennings Associates, UK
C-M. Karat, IBM TJ Watson Research Center, USA
G. Lindgaard, Carleton University, Canada
M. Mantei Tremaine, New Jersey Institute of Technology, USA
J. Scholtz, NIST, USA
C. Stephanidis, Institute of Computer Science, FORTH, Greece
M. Tscheligi, CURE - Center for Usability Research and Engineering, Austria
S. Zhai, IBM Almaden Research Center, USA
Computer Science Special Editorial Board:
T. Carey, University of Waterloo, Canada
J.M. Carroll, Virginia Tech., USA
A. Cockburn, University of Cantervury, Department of Computer Science, Christchurch, New Zealand
J. Coutaz, CLIPS-IMAG, Grenoble, France
J. Gulliksen, Uppsala University, Sweden
C. Johnson, University of Glasgow, UK
H. Johnson, University of Bath, UK
S. Mills, University of Gloucestershire, UK
B.A. Myers, Carnegie Mellon University, USA
P. Palanque, University Paul Sabatier (Toulouse 3), France
F. Paterno, C.N.R. - CNUCE, Italy
C. Plaisant, University of Maryland, USA
G.C. Prabhakar, Bell Laboratories, USA
R. Rada, University of Maryland Baltimore County, USA
C. Roast, Sheffield Hallam University, UK
B. Shneiderman, University of Maryland, USA
C. Sieckenius de Souza, Departamento de Informatica, PUC-Rio, Rio de Janeiro, Brasil
G. Szwillus, University of Paderborn, Germany
J. Vanderdonckt, Université Catholique de Louvain, Belgium
Human Sciences Special Editorial Board:
J.L. Alty, Loughborough University, UK
F. Detienne, INRIA, France
A. Dillon, University of Texas-Austin, USA
J. Grudin, Microsoft Research, USA
D. Hameluck, Don Hameluck Usability Consulting Inc., Canada
K. Hinckley, Microsoft Corporation, USA
S. Howard, The University of Melbourne, Australia.
J. Long, University College London, UK
A. Monk, University of York, UK
J. Nielsen, Nielsen Norman Group, USA
H. Oostendorp, van, Utrecht University , The Netherlands
J. Preece, University of Maryland Baltimore County, USA
M. Rauterberg, Technical University of Eindhoven, The Netherlands
S. Robertson, Drexel University, USA
M.B. Rosson, Virginia Tech, USA
M. Twidale, University of Illinois Urbana-Champaign, USA
| 
刊名字顺( Alphabetical List of Journals):
返回页首 