期刊名称:HIGH ENERGY CHEMISTRY
期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Founded in 1967, High Energy Chemistry (Khimiya Vysokikh Energii) publishes original papers on radiation chemistry, photochemistry, plasma chemistry, laser chemistry, and other aspects of high energy chemistry. It is the only scientific journal of its kind. It publishes theoretical papers and reports on experimental studies in all areas of high energy chemistry, such as the interaction of high-energy particles with matter, the nature and reactivity of short-lived species induced by the action of particle and electromagnetic radiation or hot atoms on substances in their gaseous and condensed states, and chemical processes initiated in organic and inorganic systems by high-energy radiation.
High Energy Chemistry is abstracted and/or indexed in Chemical Abstracts; Compendex Chemistry database; SCOPUS; Chemistry Database.
Instructions to Authors
INSTRUCTIONS TO AUTHORS
The journal Khimiya Vysokikh Energii (High Energy Chemistry) publishes original papers and reviews on theoretical and experimental aspects of high energy chemistry and related areas of science and technology. Letters to the editor concerning topical problems and new scientific results can be published under the rubric Short Communications.
The journal is simultaneously translated into English by IAPC Nauka–Interperiodica (Russia).
Manuscripts should be submitted in duplicate to the following address: Khimiya Vysokikh Energii (High Energy Chemistry), Editorial Office, ul. Profsoyuznaya 90, Moscow, 117997 Russia (phone: (495)-336-05-55).
The lengths of original papers should not exceed 12 to 15 pages including figures (no more than five), tables, and a list of references (no more than 20–30 references). The text should be written clearly and concisely; long and complex sentences should be avoided.
The lengths of short communications should not exceed five pages and contain only one figure, if any.
Electronic version of a manuscript is submitted by the author(s) to the editor together with a hard copy.
Manuscripts should be typed in double-spaced lines on a computer in a large (size 14) and clear font type with left-hand, right-hand, top, and bottom margins of 20 mm each and should contain up to 26 lines per page. The text printed on one side of good-quality paper should be easy to read and suitable for photocopying. Headings and subheadings should be separated from the body of text by double-spaced lines. Handwritten characters are not allowed.
The main heading appears in the following order: the title of the article, the list of authors by initials and surname, the list of affiliations and complete mailing addresses (including zip codes) of the authors, and email address. The main heading is followed by the abstract (8–10 lines) with the clearly formulated purpose and results of the study (short communications should contain no abstract). In the subsequent text, the following format is desirable: introduction, experimental, results, and discussion.
Tables should be typed on separate pages in doublespaced lines. Each table should be provided with a heading and an ordinal number. Tables should be grouped at the end of the article.
Table should be read from top to bottom of the columns having heading and separated by vertical lines. Abbreviations of words in the tables are not allowed.
Line drawings should be presented in a form suitable for quality copying or reproduction. Each drawing should be marked on the back side with the surname of the first author, the title of the article, and the figure number. Numerals or letters, not full words, should be used in notation on drawings.
For tone reproduction, the author(s) should present photographs in duplicate on glossy heavyweight paper. Scratched and punctured photographs or those having folding traces or pencil indentations are not allowed. Legend and notation are to be made only on one copy; the other copy should be kept clear of any extrinsic characters on either side within the working area. Top and bottom sides should be indicated in the photographs.
Figure captions should be given at the end of the manuscript on a separate sheet.
Positions of the tables and figures should be marked (as they are first referred to) in left margins of the manuscript.
Mathematical and chemical formulas should be numbered. Numbered equations should be placed on separate lines with the equation number in parentheses at the right-hand edge of the page.
Use symbol "×" only to denote multiplication: 5 ×10-3 mol/l. Symbol "·" should be used only for vector products (A · b) and in chemical formulas (CuSO4 · 7H2O). Point (not comma) is used as a decimal symbol.
Symbols including subscripts and superscripts used in mathematical formulas must be defined in the text; only common abbreviations may be used without explanation.
Adhere to the nomenclature, symbolism, and abbreviations recommended by the International Union of Pure and Applied Chemistry (IUPAC) (see, for example, Quantities, Units and Symbols in Physical Chemistry (Green Book), Cambridge: RSC, 2007, 3rd ed. and Glossary of Terms Used in Photochemistry, Pure Appl. Chem., 2007, vol. 79, p. 293.). With the exception of standard abbreviations, abbreviations should be kept to a minimum. Abbreviations and acronyms must be defined at their first appearance. Avoid the use of formulas and abbreviations in the title of a paper.
Use International System (SI) units of measure taking into account IUPAC recommendations for the use in chemistry. Some off-system units such as molecule/ 100 eV and curie (Ci), which are typical of high energy chemistry, may be used. SI prefixes may be attached to these units (for example, 5 ps is better than 5 × 10–12 s). Concentrations of solutions may be expressed as mol/dm3 as well as mol/l; a phrase like 0.1 M NaOH solution is acceptable (but c (NaOH) = 0.1 mol/l). A slash (solidus) may be used in limited cases when two dimensions are combined. For complex units, the use of negative powers is preferable (J mol–1 K–1, l mol–1 s–1, etc.).
References should be typed in a list at the end of the article entitled REFERENCES and numbered in the order of appearance in the text, tables, or figures. Citations in the text should be denoted by numbers in square brackets. Items for references to articles in journals include the authors' surnames and initials (comma), the title of the journal (comma), the year of publication (comma), the volume number (comma), the issue number (comma), and the page number(s). For example: Shilov, V.P., Gogolev, A.V., Fedoseev, A.M., and Pikaev, A.K., Khim. Vys. Energ., 1994, vol. 28, no. 2, p. 114. Items for book references include the authors' surnames and initials (comma), the complete title of the book (comma), the city (colon), the publisher (comma), the year of publication (comma), and the page number(s). For example, an article from a collection of articles is cited as follows: Pikaev, A.K., Fizicheskaya khimiya: Sovremennye problemy (Physical Chemistry: Modern Problems), Kolotyrkin, Ya.I., Ed., Moscow: Khimiya, 1980, p. 121.
Journal titles should be abbreviated according to the Chemical Abstracts Service Source Index (CASSI). Items for references to translated books of foreign authors in the list of references should include the title of the book in its original language, the city, the publisher, and the year of publication of the original work.
Items for references to patents and inventor’s certificates appear as follows: Ivanov, I.I., USSR Inventor’s Certificate no. 1348491, Byull. Izobret., 1989, no. 3, p. 75 or Burns, N.A. and Graves, D.J., US Patent 4675113, 1987.
If possible, references to not easily accessible publications or small editions should be avoided.
The manuscript should be signed by the author(s). Authors are requested to include a note, typed on a separate page, of the person to whom the correspondence should be addressed, the relevant post office and e-mail addresses, and a telephone number (with city code).
Instructions to Authors H0018-1439.pdf
Editorial Board
EDITOR-IN-CHIEF: Mikhail V. Alfimov Member of the Russian Academy of Sciences (RAS), Moscow, Russia
DEPUTY EDITOR-IN-CHIEF: Vladimir F. Razumov, Corresponding Member of the RAS, Institute of Chemical Physics in Chernogolovka, RAS, Chernogolovka, Russia
EXECUTIVE EDITOR-IN-CHIEF: Vadim V. Gustov, Senior Researcher, Semenov Institute of Chemical Physics, RAS, Moscow, Russia
EDITORIAL BOARD Gleb A. Abakumov, Member of the RAS, Razuvaev Institute of Organometallic Chemistry, RAS, Nizhnii Novgorod, Russia; Aleksandr K. Chibisov, Corresponding Member of the RAS, Photochemistry Center of the RAS, Moscow, Russia; Valerii L. Ermolaev, Dr. Sci. (Phys.–Math.), Research Center “Vavilov State Optical Institute”, St. Petersburg, Russia; Boris G. Ershov, Dr. Sci. (Chem.), Institute of Physical Chemistry, RAS, Moscow, Russia; Vladimir I. Fel’dman, Dr. Sci. (Chem.), Moscow State University, Moscow, Russia; Valerii P. Kazakov, Corresponding Member of the RAS, Institute of Organic Chemistry, Bashkortostan Scientific Center, Ufa, Russia; Mikhail G. Kuz’min, Dr.Sci.(Chem.), Moscow State University, Moscow, Russia; Viktor F. Plyusnin, Dr. Sci. (Chem.), Institute of Chemical Kinetics and Combustion SB of the RAS, Novosibirsk, Russia; Viktor P. Shantarovich, Dr. Sci. (Chem.), Semenov Institute of Chemical Physics, RAS, Moscow, Russia; Dmitrii I. Slovetskii, Dr. Sci. (Phys.–Math.), Topchiev Institute of Petrochemical Synthesis, RAS, Moscow, Russia; Victor P. Shantarovich, Dr.Sci.(Chem.), Semenov Institute of Chemical Physics, RAS, Moscow, Russia; Anatolii V. Vannikov, Dr. Sci. (Chem.), Frumkin Institute of Electrochemistry, RAS, Moscow, Russia; Aleksandr M. Zeltikov, Dr. Sci. (Phys.– Math.), Moscow State University, Moscow, Russia.
STAFF EDITOR Lyudmila I. Yashina
EDITOR OF THE ENGLISH TRANSLATION Stanislav V. Zatonsky, Cand. Sci. (Chem.)
|