期刊名称：FLOW TURBULENCE AND COMBUSTION
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
|
Flow, Turbulence and Combustion is published in association with the European Research Community on Flow, Turbulence and Combustion (ERCOFTAC). ERCOFTAC is a collaboration between European universities, research institutes and industry active in the area of applied fluid mechanics, and strongly promotes scientific research on current issues in this area. In this respect, the journal provides a forum for the publication of those research results that contribute to the solution of problems in flow, turbulence and combustion and related fields. The journal aims for an audience of readers and contributors coming from the entire international fluid mechanics community, both inside and outside academia, and underwriting the aims mentioned above.
The journal covers the entire domain of flow, turbulence and combustion, including all flow problems relevant in industrial, geophysical and environmental applications. The emphasis is on solid and original research results, numerical, experimental and theoretical, and their relevance to applied fluid mechanics and combustion.
The journal has evolved from Applied Scientific Research which, established in 1948, has changed over the years from a general scientific journal into a journal focusing on the applications of fluid dynamics. The title Flow, Turbulence and Combustion adopted in 1998 reflects this change of focus.
Main features of accepted papers will be originality, novelty, timeliness, and clarity of presentation. Full-length research papers and review or survey articles are equally welcome. All such contributions are subject to critical peer review prior to acceptance and publication. We also invite submission of short contributions or correspondence on new and/or controversial matters for which quick publication will be ensured. The journal puts great emphasis on applied fluid dynamics and therefore requires that authors discuss the applications aspects of their work in at least one paragraph.
|
|
Instructions to Authors
1. If you wish the time between receipt and publication to be as short as possible, please study and follow these instructions carefully.
2. There are no page charges applicable; this does not mean that it is not in the interest of the authors to concentrate their papers as much as possible. Manuscripts which are too long and wordy will be returned for condensation.
3. Flow, Turbulence and Combustion requests the final submission of papers to be in LaTeX; submission in electronic form of the final version of your article is compulsory.
For the purpose of refereeing, papers for publication should be submitted initially as hard copy (fourfold) to:
Flow, Turbulence and Combustion
Prof. F.T.M. Nieuwstadt
Lab. Aero & Hydrodynamics
Delft University of Technology
Leeghwaterstraat 21
2628 CA Delft
The Netherlands
4. The eventual supply of accepted-for-publication papers in their final form on MS-DOS or Apple Macintosh diskettes in LaTeX, together with a hardcopy version (in case anything needs to be checked), will aid more rapid publication. If you want to submit your paper in LaTeX, please use the KLUWER.STY style file and consult the accompanying sample and instruction file. A Kluwer LaTeX style file can be obtained from the Publishers (Internet: http://www.wkap.nl/authors/jrnlstylefiles/
5. Manuscripts should be submitted accompanied by copies of all tables, figures and illustrations. One set of original figures and illustrations should also be included. The authors should retain at least one other copy of the manuscript and illustrations.
6. Upon receipt of the manuscript the authors will be sent the filenumber of their paper. This number should be quoted in all correspondence thereafter.
7. Manuscripts should be written in English.
8. Letters to the Editor commenting on published results or drawing attention to some new problems or views, and not exceeding 4 pages of printed text including tables, figures and references (one page of printed text = approx. 400 words), will generally be published within 4 months of acceptance.
9. Papers already published or in press elsewhere will not be accepted, neither should subjects or experiments be described in another form without prior notification being given to the editors.
Presentation
1. Papers should be typed on one side of A4 paper (not air-mail paper), double-spaced with approximately 3-cm-wide margins and should bear the title of the contribution, the name(s) of the author(s) and address(es) of the institution on whose behalf the work was carried out.
2. The title of the paper should be as short as possible, but should contain adequate information regarding the contents.
3. All pages should be numbered.
4. Different types of headings are available and it would be helpful if authors indicated, in the left-hand margin in pencil, the relative importance of headings by the use of numbers, i.e. (H1) for main headings, (H2) for secondary headings and (H3) for the least important headings.
5. Three to 6 keywords should be supplied.
6. A brief informative abstract not exceeding 5% of the total text must be typed on a separate sheet.
7. Results of experiments or calculations should preferably be presented as graphs.
Illustrations, Tables and Plates
1. The number of illustrations, especially photographs, should be kept to a minimum. Figures should be drawn in Indian ink on white paper or on blue graph paper, and should contain no shading. They should preferably be composed in such a way that the abscissa can be reduced to 10.8 cm, the ordinate then not exceeding 16 cm after reduction. The lettering etc. should be large enough to remain legible after reduction.
2. Photographs must be supplied as glossy prints.
3. Colour plates will be inserted only at the author憇 expense. Quotes will be supplied for each individual case. Diapositives (colour transparencies) give better colour plates than colour photographs.
4. Captions for figures should be typed on a separate sheet of paper; the captions should be headed Fig. 1 etc. and should include all necessary explanations.
5. Each illustration should bear the name of the author and the figure number written in soft pencil on the reverse side.
6. All figures and tables should be clearly referred to in the text.
Abbreviations, Symbols, Units and Nomenclature
These should be according to Document U.I.P. 20 (1978) of the International Union of Pure and Applied Physics.
References
1. References to literature should be numbered alphabetically.
2. In the text use numbers in square brackets, e.g. [3, 5-7].
3. The list of references should be written according to Applied Scientific Research policy for sequence, punctuation and abbreviations (see below).
References should contain: number followed by point, author憇 name followed by initials (with points), title of paper (only first word and proper nouns to begin with capital), journal (underlined), volume number, year (in parentheses), and page numbers.
1. Crowley, A.B. and Ockendon, J.R., Modelling mushy regions. In: Smith, T.J. (ed.), Modelling the Flow and Solidification of Metals. Dordrecht: Kluwer Academic Publishers (1987) pp. 1-7.
2. Folias, E.S. (ed.), Structural Integrity: Theory and Experiment. Dordrecht: Kluwer Academic Publishers (1989) 254 pp.
3. Smith, T.J., Hoadley, A.F.A. and Scott, D.M., On the sensitivity of numerical simulations of solidification to the physical properties of the melt and the mould. Appl. Sci. Res. 44 (1987) 93-109.
Journal names should be abbreviated in conformity with the Bibliographic Guide for Editors and Authors (BIOSIS, Chemical Abstracts Service & Engineering Index, Inc., 1974).
Proofs and Offprints
Proofs and order forms should be handled promptly and returned to the publishers together with the manuscript within 3 days of receipt; excessive author corrections will be charged. For each article, 50 offprints will be supplied free of charge. Additional copies can be ordered on the forms supplied with the proofs.
For further information please address your correspondence to:
Publishing Editor
Flow, Turbulence and Combustion
Kluwer Academic Publishers
P.O. Box 990
3300 AZ Dordrecht
The Netherlands
Editorial Board
Editor-in-Chief:
F.T.M. Nieuwstadt
Delft University of Technology, The Netherlands
Editor:
J.C.R. Hunt
Dept. of Space and Climate Physics, University College, London, UK
Wolfgang Rodi
Universit鋞 Karlsruhe, Germany
L. Vervisch
INSA de Rouen, France
Advisory Editors:
R.W. Bilger, The University of Sydney, Australia; M.V. Casey, Sulzer Innotec Ltd., Winterthur, Switzerland; I.P. Castro, University of Southampton, UK; C. Dopazo, Centro Politecnico Superior, Zaragoza, Spain; K. Hanjalic, Delft University of Technology, The Netherlands; Thomas J. Hanratty, University of Illinois at Urbana-Champaign, USA; Ernst Heinrich Hirschel, DASA, Munich, Germany; Nobuhide Kasagi, The University of Tokyo, Japan; Leonhard Kleiser, Swiss Federal Institute of Technology Zurich, Switzerland; M.A. Leschziner, UMIST, Manchester, UK; M. Lesieur, Institut Universitaire de France, Grenoble, France; Parviz Moin, Stanford University, USA; Shuzo Murakami, IIS, University of Tokyo, Japan; Olivier Pironneau, Universit?Paris 6, France; S.B. Pope, Cornell University, Ithaca, NY, USA; M. Sommerfeld, Martin-Luther-University Halle-Wittenberg, Germany; Pierre-Louis Viollet, EDF, Direction des Etudes et Recherches, Clamart, France; Olivier Simonin, EDF, Laboratoire National d'Hydraulique, Chatou, France; I. Wygnanski, University of Arizona, Tucson, USA; Zhang Zhaoshun, Tsinghua University, Beijing, China
|
刊名字顺( Alphabetical List of Journals):
返回页首 