A|B|C|D|E|F|G|H|I|J|K|L|M|N|O|P|Q|R|S|T|U|V|W|X|Y|Z|ALL

  检 索： 期刊名称 ISSN         高级检索

期刊名称：JOURNAL OF CERAMIC SCIENCE AND TECHNOLOGY ISSN： 2190-9385 出版频率： Semi-annual 出版社： GOLLER VERLAG GMBH, ASCHMATTSTRASSE 8, BADEN BADEN, GERMANY, D-76532   出版社网址： http://www.goeller-verlag.de/ 期刊网址： http://www.ceramic-science.com/ 影响因子： 1.683 主题范畴： MATERIALS SCIENCE, CERAMICS 变更情况： Newly Edited by 2015 期刊简介(About the journal)    投稿须知(Instructions to Authors)    编辑部信息(Editorial Board)    About the journal The Journal of Ceramic Science and Technology publishes original scientific articles on all topics of ceramic science and technology from all ceramic branches. The focus is on the scientific exploration of  the relationships between processing, microstructure and properties of sintered ceramic materials as well as on new processing routes for innovative ceramic materials. The papers may have either theoretical or experimental background. A high quality of publications will be guaranteed by a thorough double blind peer review process. The Journal is published by Göller Verlag GmbH on behalf of the Deutsche Keramische Gesellschaft (DKG). Edited by J.G. Heinrich Clausthal University of Technology, Germany Journal Metrics Web of science Impact Factor: 0,538 5 Year Impact Factor: 0,462Scopus Scimago Journal Rank (SJR):  0,202 Instructions to Authors Guidelines for authors General remarks The Journal of Ceramic Science and Technology will publish original research relating to all categories of ceramic materials. Articles on basic research as well as processing and application of ceramic materials are welcome. Papers may have either theoretical or experimental character. Submission language is English. To sustain a high standard of the journal all manuscripts will be reviewed in a double-blind peer review process by at least two international experts and the journal editors. Only contributions that have not been submitted or printed elsewhere will be published. Once a paper has been accepted for publication, its copyright is transferred to the publisher of the Journal of Ceramic Science and Technology. Submission process Papers can be submitted electronically via the internet platform only. To enable online submissions, authors must first register and provide all required data like e-mail address, affiliation, etc. The editorial management and peer review system will support authors and reviewers to process their papers online. The editors may return manuscripts which are not in accordance with the detailed instructions for manuscript preparation or that do not fit the scope of the journal prior to the reviewing process. In revised manuscripts the changes made by the authors should be marked in red to make it easier for the reviewers to verify these changes. The journal forwards an accepted paper to Göller Verlag. When composed page proofs are available, Göller Verlag forwards them to the author for final review and to answer any editorial questions that may have resulted from editing the manuscript. The author should return the corrected page proofs as directed by Göller Verlag. If none are returned within two weeks. Göller Verlag will proceed with publication as edited. Formal requirements When starting the submission process, authors first need to choose between different article types e.g. Original Article, Review, etc. Afterwards authors will go through several submission steps where they enter various required or optional meta data like title, abstract, keywords, information about other authors, etc. To complete their submission, authors can upload documents in the last submission step. Some submission items, e.g. manuscript, are required while others are optional. All items need to be uploaded separately to avoid embedded documents e.g. figures in the manuscript. Authors should also take care that the properties or the data file names of their uploaded documents do not include their names so as not to reveal their identity to the reviewers. For further information, see details per submission item below: Title Page The cover page of the manuscript needs to be split from the main text of the manuscript and uploaded as the separate item “Title Page” to ensure all information about the author(s) remains invisible to the reviewers. This item should include the manuscript title, first and last name and full postal and e-mail address and affiliation of the corresponding author as well as the names of any co-authors. Manuscript The main text should not include any author-related information (see “Title Page”) nor embedded elements like figures or references. Each paper should be divided into different sections such as introduction, experimental, results, discussion, conclusion, and acknowledgement. References should be cited at the appropriate point in the text by a superscript numeral. They need to be uploaded separately. Mathematical expressions should be presented in an unambiguous manner. Every symbol has to be defined and multiple meanings have to be avoided. SI Units should be used for all data. If it is necessary to quote other units, these should be added in parentheses. The manuscript has to be written using proper English style and grammar. Add references or tables and figure legends in the separate submission items “References” and “Captions”. Use double spacing and wide (3 cm) margins. Number all pages consecutively, use 12 pt font size and standard fonts. References References must be uploaded as a separate submission item. References should consist of a list of citations, in the numerical order in which they appear in the paper. References to periodical papers must include the authors' names, paper title, periodical title, volume number, page range, and year of publication. Book references should include authors' names, chapter/ section title, page range, book title, editors' names, publisher's name and location, and year of publication. Papers from proceedings should include the location and date of the relevant meeting, as well as the name and location of the publisher and the year of publication. Patents should include authors’ names, title, application number and year of publication. Non-English titles of books should include the English translation of the title, in parentheses, following the non-English title. The layout for typical references is given below. Journal German, R.M., Suri, P., Park, S.J.: Liquid phase sintering, J. Mat. Sci., 44, 1 – 39, (2009) Book Reed, J.S.: Principles of Ceramic Processing. 2nd edition. John Wiley & Sons, Inc., New York, 1995. Edited Book McEvoy, A. J., Grätzel, M.: New developments in dye sensitized solar cell research. In: Ceramic Materials in Energy Systems for Sustainable Development. Techna Group, Faenza, Italy, 2009. Proceedings Fessler, J.R., Merz, R., Nickel, A.H., Prinz, F.B., Weiss, L.E.: Laser Deposition of Metals for Shape Deposition Manufacturing. In: Proceedings of the Solid Freeform Fabrication Symposium. University of Texas, Austin, Texas, 1996. Patent Halloran, J. W., Griffith, M., Chu, T.: Stereo-Lithography Resin for Rapid Prototyping of Ceramics and Metals. U.S. Patent Application 6,117,612, (2000). Figures Figures need to be uploaded in a separated file: they are not acceptable as embedded files in the manuscript document. Each figure submitted must be clearly identified with a figure number which should be in order how they are cited in the manuscript. If there are several images used for a figure each component must be clearly labeled (Figure 1a, 1b, 1c, etc.). Illustrations should be submitted as electronic files at the appropriate resolution and the size intended for publication. Color images should be submitted in full color. The type area is 185 mm wide x 275 mm deep. Two columns, each 90 mm wide. Legends min. 7pt lettering after reduction. For file format, submit line artwork (vector graphics) as Encapsulated PostScript (EPS), and halftones or photographic images as Tagged Image File Format (TIFF) or PDF files. Images saved in Microsoft Office formats should not be used. Minimum acceptable resolution at final, published size is 300 dpi (dots per inch) for color figures, 600 dpi for grayscale images, and 1200 dpi for line art. Micrographs are typically reduced before publication. Therefore magnification bars have to be used instead of magnification indicators, e.g., “200X” to make sure that scale makers are easy to read remove machine-generated information from micrographs. Add critical information in the current legend to the figure caption. Normally, manuscripts are published in black and white. Figures submitted in color will appear in color when published online. However, if color print reproduction is desired, the author must accept additional costs of 500 Euro per page. Tables Also tables should be uploaded in a separate file: they are not acceptable as embedded files in the manuscript document. Each table submitted must be clearly identified with a table number which should be in the order in which they are cited in the manuscript. Each table with a concise title should begin on a new page. Captions Captions of figures or tables need to be uploaded as a separated text document. This item should include a list of all captions in order how they are cited in the manuscript. Each caption must be clearly identified with the figure or table number. If a figure or table consists of several components, please ensure that the caption clearly indicates the significance of each part of the overall figure. Others There exists an additional submission item “Language Edited File”. This is for the internal production purposes of the Göller Verlag only and does not refer to the author submission process. Please ignore this.    Download Author Guidelines (PDF, 84 KB) Instructions to Authors jcst_author_guidelines.pdf Editorial Board Journal Editor Jürgen G. Heinrich Clausthal University of Technology Germany Associate Editor Jens Günster Federal Institute for Materials Research and Testing, BAM Berlin, Germany Executive Director Detlev Nicklas German Ceramic Society Cologne, Germany Editorial Board Christos Aneziris TU Bergakademie Freiberg Germany Csaba Balázsi      Institute for Materials Science and Technology Budapest, Hungary Yoshio Bando National Institute for Materials Science Tsukuba, Japan Carmen Baudín Instituto de Cerámica y Vidrio Madrid, Spain Alida Bellosi National Research Council of Italy Faenza, Italy Lennart Bergström Stockholm University Sweden Anup K. Bhattacharya Aditya Birla Science & Technology Company Ltd. India Jon Binner University of Birmingham United Kingdom Aldo R. Boccaccini University of Erlangen-Nuremberg, Germany Imperial College London, United Kingdom David L. Bourell University of Texas at Austin USA Thierry Chartier Science des Procédés et de Traitements de Surface Limoges, France Paolo Colombo University of Padova Italy Robinson Carlos Dudley Cruz Universidade de Caxias do Sul Brazil Robert Danzer Montanuniversität Leoben Austria Fatih Dogan University of Missouri-Rolla MO, USA José M.F. Ferreira University of Aveiro Portugal Rainer Gadow Universität Stuttgart Germany Ludwig Gauckler ETH Zürich Switzerland Farahd Golestanifard Iran University of Science and Technology Tehran, Iran Gideon Grader Technion Haifa, Israel Thomas Graule, EMPA, Swiss Federal Laboratories for Materials Science Dübendorf, Switzerland Peter Greil Universität Erlangen-Nürnberg Germany Stuart Hampshire University of Limerick Ireland Shin-Ichi Hirano Hirano Institute for Materials Innovation at Shanghai Jiao Tong University China Dachamir Hotza Federal University of Santa Catarina Brazil Xiaozhi Hu University of Western Australia Perth, Australia Valentin Ievlev Voronezh State University Russia Rolf Janßen Hamburg University of Technology Germany Dechang Jia Harbin Institute of Technology China Dongliang Jiang Shanghai Institute of Ceramics, Chinese Academy of Sciences China Toshihiro Kasuga Nagoya Institute of Technology Japan Oleg L. Khasanov National Research Tomsk Polytechnic University Russia Hai-Doo Kim Institute of Machinery and Materials Changwong, South Korea Hans-Joachim Kleebe Technische Universität Darmstadt Germany Zviad Kowsiridze Georgian Technical University Tiflis, Georgia Walter Krenkel Universität Bayreuth Germany Jianbao Li Hainan University/Tsinghua University Beijing, China Yawei Li Wuhan University of Science and Technology China Sanjay Mathur Universität zu Köln Germany Jörg Melcher Deutsches Zentrum für Luft- und Raumfahrt Braunschweig, Germany Alexander Michaelis Fraunhofer-Institut für Keramische Technologien und Systeme IKTS Dresden, Germany Vojislav Mitic Department of Microelectronics, University of Nis Serbia Saleh Mohammed Fayoum University Egypt Ralf Moos Universität Bayreuth Germany Salma M. Naga National Research Center Cairo, Egypt Tatsuki Ohji Advanced Manufacturing Research Institute Nagoya, Japan Dong-Soo Park Korea Institute of Machinery and Materials Kyungnam, South Korea Peter Quirmbach ECREF European Centre for Refractories gGmbH Höhr-Grenzhausen, Germany Ralf Riedel TU Darmstadt Germany Andreas Roosen Universität für Erlangen-Nürnberg Germany Pavol Sajgalik Slovak Academy of Sciences Bratislava, Slovakia Yoshio Sakka National Institute for Matericals Science Tsukuba, Japan Martin Schmücker Deutsches Zentrum für Luft- und Raumfahrt Cologne, Germany Vladimir Ya. Schevchenko Russian Academy of Science St. Petersburg, Russia Olga Shilova Institute of Silicate Chemistry of Russian Academy of Sciences Saint-Petersburg, Russia Alex Shluger University College London United Kingdom Wolfgang Sigmund University of Florida Gainsville, FL, USA Mrityunjay Singh Ohio Aerospace Institute Cleveland, OH, USA Vladimir Srdic University of Novi Sad Serbia Vijay Srivastava Banaras Hindu University Varanasi, India Danilo Suvorov Jozef Stefan Institut Ljubljana, Slovenia Mikolaj Szafran Warsaw University of Technology Poland Sabine Szunerits University Lille 1 France Rainer Telle RWTH Aachen Germany Nahum Travitzky Universität Erlangen-Nürnberg Germany Yoed Tsur Technion - Israel Institute of Technology Haifa, Israel Omer van der Biest K.U.Leuven Belgium Bärbel Voigtsberger Fraunhofer Institut für Keramische Technologien und Systeme IKTS Hermsdorf, Germany Adrian Volceanov University Politehnica of Bucharest Romania Louis Winnubst University of Twente The Netherlands Xiaowei Yin Northwestern Polytechnical University Xi'an, Shaanxi , P.R.China Masahiro Yoshimura Promotion Center of Global Materials Research Taiwan Paolo Zannini Università Degli Studi Bologna, Italy Yu-Ping Zeng Shanghai Institute of Ceramics, Chinese Academy of Sciences China