期刊名称：AUTEX RESEARCH JOURNAL
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
ISSN 1470-9589, eISSN 2300-0929
Only few journals deal with textile research at an international and global level complying with the highest standards.
Autex Research Journal has the aim to play a leading role in distributing scientific and technological research results publishing original and innovative papers after peer reviewing, guaranteeing quality and excellence.
Everybody dedicated to textiles and textile related materials is invited to submit papers and to contribute to a positive and appealing image of this Journal. In the end it is all about excellence!
Prof. Dr. Paul Kiekens, Dr. h. c.
Gent, Belgium
The overall importance of scientific research is evident. All the objects, real and virtual, are made as result of research activities. Highly profitable and flourishing industrial sectors are those where the research efforts and investments were the strongest. The situation in the Textile - Retail complex is different. Research activities supposed to bring higher added value to textile based objects and products are not satisfying. Despite of efforts, the number of high quality scientific articles is not significant all over the world and particularly in Europe, comparing to the number of jobs and the annual turnover of our industry. This situation should change. The promotion of research activities in the Textile - Retail complex will be my main objective for the period 2007 - 2010.
The principal goal of AUTEX RESEARCH JOURNAL (ARJ) is to enhance the scientific knowledge base for the development and viability of European and World Textile - Retail industry.
The AUTEX RESEARCH JOURNAL scientific excellence, together with the relevance to industry or to AUTEX goals, should be achieved by the strong selectivity via the reviewing process. Reviewers are drawn from AUTEX and other compatible Universities, and also from industry. The number of proposals submitted for reviewing process has to increase. This may be realized by better promotion and dissemination of the journal worldwide. Special issues will also been edited based on different conference papers. The purpose of the special issues is to recognize the leadership of special editors and the quality research of the authors as well as their contributions to particular areas. In addition, it is also believed that such practice can provide the flexibility and opportunity for cross-disciplinary exchange and cooperation frontier research.
I would also like to thank people involved in publishing of the ARJ started in 1999, on the web site at Leeds University. In 2002 colleagues at the Technical University of Lodz took over the responsibility for publishing the journal. I would also like to invite all the AUTEX members to make additional efforts in order to improve the quality and the impact of our Journal.
Professor Vladan Koncar,
ENSAIT, Roubaix, France
President of AUTEX
The AUTEX RESEARCH JOURNAL (AutexRJ) is a quarterly journal devoted to the publication of theoretical and empirical scientific research work in all areas of textile science, technology, economics and indus trial policy.
The access to the AutexRJ is free of charge and open to everyone.
The AutexRJ is a full electronic journal but on request the editor can deliver a hard copy of the journal, with the total cost bourn by the person giving the order.
Contributions are expected to be original works which have not been previously published and are not currently under consideration for publication elsewhere. Papers published in the journal will normally be reporting original research results obtained by the authors, but review papers of a high standard will also be accepted.
Papers which will be, or which have been submitted for scientific conferences, may be published in the AutexRJ under the condition that the paper under consideration has not been printed or will not be printed in any journal or other official publication with the exclusion of conference proceedings. In these cases, where the paper has been or will be presented at a conference, an appropriate statement note should be included in the paper
If a paper is accepted for publication the author will be required to sign a copyright declaration. The declaration form should be downloaded from here. The paper cannot be published until the authors have returned this declaration by e-mail or fax with an original signature. The authors will be contacted for this purpose, once the review procedure is complete.
All submissions are double-blind refereed by two well-known scientists and experts in the subject area of the paper. Referees comments will be communicated to authors, with suggested and required revisions. Upon revisions, papers should be re-submitted in the modified form, in the same manner as the original submission.
All prepared material to be submitted for publication as well as related correspondence should be sent electronically using your Customer Panel, after registration in our service.
For more information please contact:
Katarzyna Grabowska Ph.D., D.Sc.
E-mail: katarzyna.grabowska@p.lodz.pl
Izabella Ciesielska-Wróbel Ph.D. Eng.
E-mail: izabela.ciesielska-wrobel@p.lodz.pl
No responsibility is assumed by the publisher for any injury and/or damage to persons or property as a matter of application of any methods, products, instructions or ideas contained in the material herein.
Although all advertising material which may be included in the published papers is expected to conform to ethical standards, inclusion in this publication does not constitute a guarantee or endorsement of the quality or value of such product.
No part of this publication may be reproduced in printed or electronic form without the prior written permission of the publisher: Lodz University of Technology, Faculty of Material Technologies and Textile Design, Poland
Instructions to Authors
How to prepare your paper for the AutexRJ
A standard paper of the article should contain (in the listed order):
- Paper title (of less than 120 characters),
- Authors name (full first name and surname),
- Authors address (name of affiliation, department, city, state, mailing address, tel., fax, and e-mail),
- Abstract (no longer than 300 words),
- Key words (4 – 8 key words should express the precise content of the article),
- Main text (with headings, eventually subheadings etc., e.g Theoretical, Experimental, Materials, Results, Discussion etc.),
- Conclusions,
- Footnotes (eventually – footnotes should be avoided; when their use is absolutely necessary, they should be numbered consecutively using Arabian numerals eg. 1) and typed at the end of the paper,
- Acknowledgements (eventually – information about delivering the paper to a conference, about sponsors etc.),
- References (References should be indicated in the text by a number in square brackets and this number should correspond to the alphabetical order according surname of the first author),
- Tables and figures should be inserted in the text at the appropriate points. Attention should be given not to leave to much free place. All tables and figures should be numbered (with Arabic numerals) consecutively and separately throughout the paper, and referred to by numbers in text. Photographs should be numbered as figures.
The paper should be prepared in Microsoft Word editor. Equations should be written in the Microsoft Equation editor included in Microsoft Office. The editors reserve the right to change the arrangement of the paper. The styles which should be used in the prepared paper are listed in table 1.
Table 1. Stiles used in the preparation of a paper
| Style name |
Typeface |
Size |
Alignment |
Paragraph spacing |
| PAPER TITLE |
ARIAL BOLD CAPITAL LETTERS |
14 POINT |
LEFT |
|
| Authors name |
Arial bold |
10 point |
Left |
|
| Authors affiliation |
Arial |
10 point |
Left |
|
| Authors address |
Arial |
10 point |
Left |
|
| Abstract (title) |
Arial italic bold |
12 point |
Left |
|
| Abstract (text) |
Arial italic |
10 point |
Justified, inset by 1 cm both sides |
|
| Key words (title) |
Arial italic bold |
12 point |
Left |
|
| Key words text |
Arial italic |
10 point |
Justified, inset by 1 cm both sides |
|
| Headings |
Arial bold |
12 point |
Left |
2 line space after text, 1 line space before text |
| Sub headings |
Arial bold underlined |
10 point |
Left |
1 line space after heading |
| Sub heading second grade |
Arial bold italic |
10 point |
Left |
1 line space after sub heading |
| Main text |
Arial |
10 point |
Justified, single column layout |
Line space after |
| Figure caption
(Figure x) |
Arial |
9 point |
Left (adjust to match position of picture) |
1 line space after picture, 2 lines space before text (the figure caption should be placed below the figure) |
| Figure caption (text) |
Arial |
9 point; descriptions included in the figures should not be smaller than 9 point (preferred are 9 or 10 point) |
Left (adjust to match position and width of picture) |
1 line space after picture, 2 lines space before text |
| Table caption (Table x) and headings of columns and rows |
Arial
Note: The lines below the heading raw and at right of the heading column should be bold |
9 point |
Left (adjust to match position of table) |
2 lines space after text, 1 line space before table (the table caption should be placed above the the table) |
| Table caption text |
Arial |
9 point |
Left (adjust to match position and width of table) |
2 line space after text, 1 line space before table |
| References (title) |
Arial italic bold |
12 point |
Left |
2 lines after |
| References (text, numbered) |
Arial italic |
10 point |
Left |
|
| Acknowledge- ment (title) |
Arial italic bold |
12 point |
Left |
|
| Acknowledgement (text) |
Arial italic |
10 point |
Left |
|
| Footnotes (title) |
Arial italic bold |
9 point |
Left |
|
| Footnotes (text, numbered) |
Arial italic |
9 point |
Left |
|
Editorial Board
Chairmen:
- Prof. Vladan Koncar - ENSAIT, Roubaix, FRANCE
- Prof. Paul Kiekens - University of Ghent, BELGIUM
Members:
- Prof. M. Neznakomova - Technical University Sofia - Department of Textile Engineering, BULGARIA
- Prof. J. Militky - Technical University of Liberec - Textile Faculty - Department of Textile Materials, CZECH REPUBLIC
- Prof. P. Nousiainen - Tampere University of Technology - Fibre Materials Science Institute, FINLAND
- Prof. L. Schacher - ENSISA - Ecole Nationale Supérieure des Ingénieurs Sud Alsace, FRANCE
- Prof. T. Gries - RWTH Aachen - Institut für Textiltechnik der Rheinisch-Westfälischen T.H. Aachen, GERMANY
- Prof. C. Cherif - TU Dresden - Institute of Textile and Clothing Technology, GERMANY
- Prof. T. Peppas - TEI Piraeus - Department of Textile Engineering - Faculty of Technological Applications, GREECE
- Prof. S. Sicardi - Politecnico di Torino - Department of Materials Science and Technical Engineering, ITALY
- Prof. S. Stanys - Kaunas University of Technology - Faculty of Design and Technologies - Department of Textile Technology, LITHUANIA
- Prof. M. Warmoeskerken - University of Twente - Faculty for Engineering Technology - Engineering of Fibrous Smart Materials, THE NETHERLANDS
- Prof. I. Krucinska / Prof. J. Masajtis - Technical University of Lodz - Textile Faculty, POLAND
- Prof. S. Boryniec - University of Bielsko-Biala - Faculty of Textile Engineering and Environmental Protection - Institute of Textile Engineering and Polymer Materials, POLAND
- Prof. M. de Araújo - University of Minho - School of Engineering, PORTUGAL
- Prof. Manuel José dos Santos Silva - Universidade da Beira Interior - Departamento de Ciencia e Tecnologia Texteis, PORTUGAL
- Prof. C. Loghin - Technical University of Iasi - Faculty of Textiles and Leather Engineering, ROMANIA
- Prof. A. Majcen le Marechal / Prof. J. Gersak - University of Maribor - Faculty of Mechanical Engineering - Department of Textiles, SLOVENIA
- Dr. K. Dimitrovski - University of Ljubljana - Faculty for Natural Sciences and Engineering - Department of Textiles, SLOVENIA
- Prof. F.J. Carrión-Fité / Prof. A. Naik / Prof. J.M. Canal - UPC - Department of Textile and Paper Engineering, SPAIN
- Prof. K. Tingsvik - University of Bor�s - School of Textiles, SWEDEN
- Prof. C. Carr - University of Manchester - School of Materials - Textiles and Paper Group,U.K.
- Prof. R.H. Wardman - Heriot Watt University - School of Textiles and Design, U.K.
- Prof. Genti Guxho - Polytechnic University of Tirana - Textile and Fashion Department, ALBANIA
- Prof. A.M. Grancaric - University of Zagreb - Faculty of Textile Technology, CROATIA
- Prof. M. Radetic - University of Belgrade - Faculty of Technology and Metallurgy - Textile Engineering Department, SERBIA
- Prof. I. Tarakcioglu/Prof. H. Kadoglu Ege University - Faculty of Engineering - Textile Engineering Department, TURKEY
- Prof. Bulent Ozipek - Istanbul Technical University - School of Textile Technologies and Design,TURKEY
- Prof. Sükriye Ülkü/Prof. Recep Eren Uludag - University - Faculty of Engineering and Architecture -Textile Engineering Department, TURKEYProf. Victoria Vlasenko - Kiev National University of Technologies and Design, UKRAINE
- Prof. Jaros�aw Janicki, Ph.D., D.Sc., University of Bielsko-Bia�a Poland.
Associate Members:
- Prof. W. Oxenham / Prof. D. Buchanan / Dr. B. Godfrey - North Carolina State University - College of Textiles, USA
- Prof. Wei Li Donghua University - College of Textiles, CHINA
|
刊名字顺( Alphabetical List of Journals):
返回页首 