期刊名称：ATMOSPHERIC ENVIRONMENT
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Atmospheric Environment is an international journal dedicated to the publication of high quality research in the field of air pollution and its societal impacts. The main aim of Atmospheric Environment is to provide a scientific understanding of the consequences of natural and human-induced perturbations to the earth's atmosphere. Papers should present novel results based on state of the art scientific methods involving atmospheric observations, modeling, and analysis extending from local to global scales. The journal scope is broad and includes processes involving chemistry and physics of the atmosphere as well as subjects related to human health, welfare, climate change, and environmental policy. Atmospheric Environment publishes original research and review articles, special issues and supplements, and New Directions columns.
To help our authors in the submission process we offer guidelines below to define areas of main interest to Atmospheric Environment and types of papers that may not be appropriate.
High priority subjects : The following subject areas are considered high priority and we encourage both stand-alone papers and special issues in these.
- Field campaigns and laboratory studies of atmospheric physical/chemical processes
- Innovative air quality observations including space based remote sensing
- Anthropogenic/biogenic emissions and inventories
- Biospheric-atmospheric exchange and deposition
- Modeling and analysis from local to global scales
- Air pollution and climate change interactions
- Health and welfare effects associated with pollution exposure
- Indoor air pollution
- Environmental policy
Instructions to Authors
Introduction
The subject matter of papers published in Atmospheric Environment covers air pollution research and its applications, click here for more information
Types of Paper
The Journal publishes Research Papers, Short Communications, Technical Notes, Discussion of published papers, Book Reviews, Critical Literature Reviews, a New Directions Column. In addition, special issues on topical themes are published.
Short Communications and Technical Notes
These papers cover topics which may be simpler in structure or of more limited interest. They also include instrumental methods. At times they might report negative findings, unusual or unexplained observations or short sets of measurements made in rather unique situations. The general style of these papers is similar to that of full papers. Manuscripts for these papers must not exceed ten sides including all references and diagrams. They should not exceed 3000 words.
New Directions Articles
New Directions is an invited or contributed column reporting on late-breaking, controversial and speculative issues in all aspects of the atmospheric sciences. The articles are intended to have a broad appeal to the readership of the Journal, and to provide a focus and forum for further discussion. They are short in length (1300 words) and written in a popular style, not as scientific papers, but are nevertheless authored by experts in their field. Correspondence on previously published New Directions articles is welcomed, and will be considered for publication at the Editor's discretion. The columns are prominently featured in the Journal using grey-edged paper for the article, and a matching display box on the back page. For further details on the New Directions column please email newdirections@live.co.uk
Instructions for Authors for New Directions Papers
Articles are limited to 1,300 words inclusive and should fit within two printed pages in the journal.
Articles and correspondence should be sent by email to: newdirections@live.co.uk. The use of the 'active' rather than the 'passive' voice in articles is encouraged. New Directions columns are intended to have a more 'journalistic' flavour than a strict scientific style.
Text-only articles are welcome. Where figures are used these should be the minimum required (preferably only one) to convey the main thrust of the article, be clearly presented, and simple. They will be much reduced in size, so legends and titles should be clear and large enough to allow reduction to a single-column width. They should be accompanied by suitable figure legends along with the main text. Originals should be drawn with ink, or printed on a high quality printer (preferably laser). They should have the author's name, and the figure number, on the back and be sent by mail to the New Directions Editor. Alternatively they may be sent electronically as discrete or embedded Word or Excel charts. Other graphical formats may also be acceptable (bitmaps, GIF and JPEG formats, PDF, etc.).
Tables should also be kept to the minimum required, and be presented in the simplest style possible (three horizontal lines: one at the top, one at the bottom, and one under the column headers; no vertical lines; and minimum number of columns).
References should be kept to an absolute minimum and there is no prohibition on 'grey' literature so long as it is fully attributed.
The Editors reserve the right to reject, edit, or reword submitted articles. Authors will have the opportunity to inspect galley proofs of their columns before final printing. The decision of the Editors is final.
Research Announcements
These are formal announcements of important new international research programmes and opportunities, or summaries of officially reported outcomes of major new studies (in some cases these may be suitable for consideration as New Directions columns). There is a one printed page limit. Research Announcements are handled in the same way as New Directions columns (except tha
Ethics in Publishing
For information on Ethics in Publishing and Ethical guidelines for journal publication see http://www.elsevier.com/publishingethics and http://www.elsevier.com/ethicalguidelines.
Policy and ethics
The work described in your article must have been carried out in accordance with The Code of Ethics of the World Medical Association (Declaration of Helsinki) for experiments involving humans http://www.wma.net/e/policy/b3.htm; EC Directive 86/609/EEC for animal experiments http://ec.europa.eu/environment/chemicals/lab_animals/legislation_en.htm; Uniform Requirements for manuscripts submitted to Biomedical journals http://www.icmje.org. This must be stated at an appropriate point in the article.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived to influence, their work. See also http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any other language, without the written consent of the copyright-holder.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright see http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations and translations (please consult http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details you are referred to: http://www.elsevier.com/authorsrights.
Role of the funding source
You are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the paper for publication. If the funding source(s) had no such involvement then this should be stated. Please see http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements and policies please visit http://www.elsevier.com/fundingbodies.
Sponsored articles
This journal offers you the choice of making your article freely available to all on Elsevier's electronic publishing platforms. The charge for article sponsorship is $3,000, which is necessary to offset publishing costs. To prevent any conflict of interest, you can only make this choice after receiving notification that your article has been accepted for publication. Full details of the sponsored Open Access options available to you and your funding body can be found here: http://www.elsevier.com/locate/sponsoredarticles. Whatever access option you choose, you retain many rights as an author, including the right to post a revised personal version of your article on your own website. More information can be found here: http://www.elsevier.com/authorsrights.
Language and language services
Please write your text in good English (American or British usage is accepted, but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission please visit http://www.elsevier.com/languageediting or our customer support site at http://support.elsevier.com for more information.
Submission
Submission to this journal proceeds totally online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Referees
Please submit, with the manuscript, the names, addresses and e-mail addresses of 3 potential referees. Note that the editor retains the sole right to decide whether or not the suggested reviewers are used.
Use of wordprocessing software
It is important that the file be saved in the native format of the wordprocessor used. The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. Do not embed "graphically designed" equations or tables, but prepare these using the wordprocessor's facility. When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier: http://www.elsevier.com/guidepublication). Do not import the figures into the text file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript. See also the section on Electronic illustrations.
To avoid unnecessary errors you are strongly advised to use the "spell-check" and "grammar-check" functions of your wordprocessor.
Please ensure your manuscript contains line numbers. If line numbers are missing, your manuscript will be returned back to you, and peer-review will not proceed.
LaTeX
If the LaTeX file is suitable, proofs will be produced without rekeying the text. The article should preferably be written using Elsevier's document class "elsarticle", or alternatively any of the other recognized classes and formats supported in Elsevier's electronic submissions system, for further information see http://www.elsevier.com/wps/find/authorsview.authors/latex-ees-supported.
The Elsevier "elsarticle" LaTeX style file package (including detailed instructions for LaTeX preparation) can be obtained from the Quickguide: http://www.elsevier.com/latex. It consists of the file: elsarticle.cls, complete user documentation for the class file, bibliographic style files in various styles, and template files for a quick start.
Article structure
Subdivision - numbered sections
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to "the text". Any subsection may be given a brief heading. Each heading should appear on its own separate line.
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Material and methods
Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.
Theory/calculation
A Theory section should extend, not repeat, the background to the article already dealt with in the Introduction and lay the foundation for further work. In contrast, a Calculation section represents a practical development from a theoretical basis.
Results
Results should be clear and concise.
Discussion
This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.
Conclusions
The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.
Appendices
If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.
Essential title page information
• Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
• Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each author.
• Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.
• Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a "Present address" (or "Permanent address") may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.
Keywords
Immediately after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, "and", "of"). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.
Abbreviations
Define abbreviations that are not standard in this field in a footnote to be placed on the first page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.
Acknowledgements
Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).
Units
Follow internationally accepted rules and conventions: use the international system of units (SI). If other units are mentioned, please give their equivalent in SI.
Math formulae
Present simple formulae in the line of normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly in the text).
Footnotes
Footnotes should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.
Table footnotes
Indicate each footnote in a table with a superscript lowercase letter.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as "graphics" or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.
• Submit each figure as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless of the application used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save the text as "graphics".
TIFF: color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
DOC, XLS or PPT: If your electronic artwork is created in any of these Microsoft Office applications please supply "as is".
Please do not:
• Supply embedded graphics in your wordprocessor (spreadsheet, presentation) document;
• Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in color in the printed version. For color reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color in print or on the Web only. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to "gray scale" (for the printed version should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached to the figure. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
References
Citation in text
Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference style of the journal and should include a substitution of the publication date with either "Unpublished results" or "Personal communication" Citation of a reference as "in press" implies that the item has been accepted for publication.
Web references
As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
References in a special issue
Please ensure that the words 'this issue' are added to any references in the list (and any citations in the text) to other articles in the same Special Issue.
Reference Style
Responsibility for the accuracy of bibliographic citations lies entirely with the Authors. All publications cited in the text should be presented in a list of references following the text of the manuscript. The list of references should be arranged first alphabetically and then further sorted chronologically if necessary.
In the text refer to the author's name (without initials) and year of publication (e.g. "Since Vingarzan (2004) has shown that..." or "This is in agreement with results obtained later (Atkinson, 2000)". For three or more authors use the first author followed by "et al.", in the text. References should be given in the following form:
In the text as: Crutzen (2004) or (Crutzen, 2004) according to content of sentence, list in alphabetical order of first author's surname at end of text as follows: Author's name(s), initials, year of publication, title.
Periodicals title should be written out in full, volume number and inclusive page numbers. Beevers S.D., Carslaw D.C., 2005. The impact of congestion charging on vehicle emissions in London. Atmospheric Environment 39, 1-5.
Books references, title pages, publisher's name and location: Heintzenberg J., 2002. Aerosols / Physics and Chemistry of Aerosols, in: Holton J.R. et al. (Eds.), Encyclopedia of Atmospheric Sciences, Elsevier, Amsterdam, pp. 34-40.
Citing and listing of web references. As a minimum, the full URL should be given. Any further information, if known (author names, dates, reference to a source publication etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
All cited material should be accessible to the public. Internal publications, conference proceedings, etc.; avoid if possible. If essential, include sufficient information for the reader to locate the reference. In particular references to conferences should contain the address of the organization responsible.
Video data
Elsevier accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit with their article are strongly encouraged to include these within the body of the article. This can be done in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material is directly usable, please provide the files in one of our recommended file formats with a maximum size of 10 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose any frame from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the link to your video data. For more detailed instructions please visit our video instruction pages at http://www.elsevier.com/artworkinstructions. Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that refer to this content.
Supplementary data
Elsevier accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at http://www.elsevier.com/artworkinstructions.
Submission checklist
It is hoped that this list will be useful during the final checking of an article prior to sending it to the journal's Editor for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following items are present:
One Author designated as corresponding Author:
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been uploaded
• Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
• Manuscript has been "spellchecked" and "grammar-checked"
• References are in the correct format for this journal
• All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Web)
• Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print or to be reproduced in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required, black and white versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site at http://support.elsevier.com.
Please ensure your manuscript contains line numbers. If line numbers are missing, your manuscript will be returned back to you, and peer-review will not proceed.
Additional Information
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as "graphics" or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Helvetica, Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide all illustrations as separate files.
• Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.
• A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions. You are urged to visit this site; some excerpts from the detailed information are given here.
• Manuscript is less than 6500 words unless length extension has been granted by the executive editor. Diagrams should be kept to a minimum.
• References are in the correct format for this journal
• Permission has been obtained for use of copyrighted material from other sources (including the Web)
Use of the Digital Object Identifier
The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. The correct format for citing a DOI is shown as follows (example taken from a document in the journal Physics Letters B):
doi:10.1016/j.physletb.2003.10.071
When you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed never to change.
Proofs
One set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download the files themselves. Elsevier now provides authors with PDF proofs which can be annotated; for this you will need to download Adobe Reader version 7 (or higher) available free from http://www.adobe.com/products/acrobat/readstep2.html. Instructions on how to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the Adobe site: http://www.adobe.com/products/acrobat/acrrsystemreqs.html#70win.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible to get your article published quickly and accurately. Therefore, it is important to ensure that all of your corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article if no response is received.
Offprints
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can be ordered via the offprint order form which is sent once the article is accepted for publication. The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
For inquiries relating to the submission of articles (including electronic submission where available) please visit this journal's homepage. You can track accepted articles at http://www.elsevier.com/trackarticle and set up e-mail alerts to inform you of when an article's status has changed. Also accessible from here is information on copyright, frequently asked questions and more. Contact details for questions arising after acceptance of an article, especially those relating to proofs, will be provided by the publisher.
Editorial Board
Executive Editor:
P. Brimblecombe, School of Environmental Sciences, University of East Anglia, Norwich NR4 7TJ, UK. http://www.uea.ac.uk/~e044/ae.htm Fax: (01603) 507719, Email: atmos_env@uea.ac.uk
Executive Editor:
H.B. Singh, (For photochemical pollution, trace chemicals and fate, global change, atmospheric chemistry, photochemical modelling, and other relevant subjects) Space Science Division, US 245-5, NASA AMES Research Center, Moffett Field, CA 94035, USA. http://geo.arc.nasa.gov/sgg/singh/. Email: editor@AEnorthamerica.com or Hanwat.B.Singh@nasa.gov
Emeritus Editors:
M. Benarie, Suresnes, France
R. Bornstein, San Jose, CA, USA
A.S. Lefohn, Helena, MO, USA
P.J. Lioy, Piscataway, USA
J.P. Lodge Jr, Boulder, CO, USA
R.S. Scorer, London, UK
Assistant Editor:
J.F. Austin, School of Environmental Sciences, University of East Anglia, Norwich NR4 7TJ, UK. Email: atmos_env@uea.ac.uk
Assistant Editor (New Directions Column):
W. Sturges, School of Environmental Sciences, University of East Anglia, Norwich NR4 7TJ, UK
Editorial Advisory Board:
P. Artaxo, Sao Paulo, Brazil
L.A. Barrie, Richland, WA, USA
P.J.H. Builtjes, Apeldoorn, The Netherlands
G.R. Carmichael, Iowa City, IA, USA
N. Carslaw, York, UK
Y.S. Chung, Choongbook, Korea
A.C. Comrie, Tucson, AZ, USA
K.L. Demerjian, Albany, NY, USA
M.C. Facchini, Bologna, Italy
B.J. Finlayson-Pitts, Irvine, CA, USA
J. Fuhrer, Zurich, Switzerland
A.B. Guenther, Boulder, CO, USA
R.M. Harrison, Birmingham, UK
M.J. Hazucha, Chapel Hill, NC, USA
H. Horvath, Wien, Austria
M. Hu, Beijing, People's Republic of China
D.J. Jacob, Cambridge, MA, USA
M. Jacobson, Stanford, CA, USA
M. Kanakidou, Heraklion, Greece
M.A.K. Khalil, Portland, OR, USA
K. Law, Paris, France
M.G. Lawrence, Mainz, Germany
R.L. Maynard, London, UK
P.H. McMurry, Minneapolis, MN, USA
L. Morawska, Brisbane, Australia
N. Moussipoulos, Thessaloniki, Greece
Ir.F.T.M. Nieuwstadt, Delft, The Netherlands
A.-L. Pasanen, Kuopio, Finland
S.T. Rao, Albany, NY, USA
A.G. Robins, Guildford, UK
C. Sabbioni, Bologna, Italy
J.H. Seinfeld, Pasadena, CA, USA
Shinji Wakamatsu, Ibaraki, Japan
F.B. Smith, Bracknell, UK
P. Switzer, Stanford, CA, USA
M. Tolbert, Boulder, CO, USA
Toschiichi Okita, Ibaraki-ken, Japan
M.H. Unsworth, Corvallis, OR, USA
H. van Dop, Utrecht, The Netherlands
C. Venkataraman, Mumbai, India
P. Warneck, Mainz, Germany
C.J. Weschler, Piscataway, NJ, USA
| 
刊名字顺( Alphabetical List of Journals):
返回页首 