期刊名称：ADVANCES IN WATER RESOURCES
 期刊简介(About the journal)
投稿须知(Instructions to Authors)
编辑部信息(Editorial Board)
About the journal
Advances in Water Resources provides a forum for the presentation of fundamental scientific advances in the understanding of water resources systems. The scope of Advances in Water Resources includes any combination of theoretical, computational, or experimental approaches used to advance fundamental understanding of surface or subsurface water resources systems or the interaction between these systems. Manuscripts involving applications or design, but not advancing fundamental understanding, are not appropriate for Advances in Water Resources.
Examples of appropriate topical areas that will be considered include the following:
• Surface and subsurface hydrology
• Hydrodynamics and hydrometeorology
• Multiphase transport phenomena
• Modeling fluid flow and species transport and reaction processes
• Mathematical and stochastic analysis of water resources systems
Instructions to Authors
Ethics in Publishing
For information on Ethics in Publishing and Ethical guidelines for journal publication see http://www.elsevier.com/publishingethics and http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived to influence, their work. See also http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any other language, without the written consent of the copyright-holder.
Contributors
Each author is required to declare his or her individual contribution to the article: all authors must have materially participated in the research and/or article preparation, so roles for all authors should be described. The statement that all authors have approved the final article should be true and included in the disclosure.
The Editors likewise require referees to disclose any current or recent association with the authors and other special interest in this work.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (for more information on this and copyright see http://www.elsevier.com/copyright). Acceptance of the agreement will ensure the widest possible dissemination of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations and translations (please consult http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included, the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consult http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details you are referred to: http://www.elsevier.com/authorsrights.
Role of the funding source
You are requested to identify who provided financial support for the conduct of the research and/or preparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the paper for publication. If the funding source(s) had no such involvement then this should be stated. Please see http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions of their grant awards. To learn more about existing agreements and policies please visit http://www.elsevier.com/fundingbodies.
Sponsored articles
This journal offers you the choice of making your article freely available to all on Elsevier's electronic publishing platforms. The charge for article sponsorship is $3,000, which is necessary to offset publishing costs. To prevent any conflict of interest, you can only make this choice after receiving notification that your article has been accepted for publication. Full details of the sponsored Open Access options available to you and your funding body can be found here: http://www.elsevier.com/locate/sponsoredarticles. Whatever access option you choose, you retain many rights as an author, including the right to post a revised personal version of your article on your own website. More information can be found here: http://www.elsevier.com/authorsrights.
Language and language services
Please write your text in good English (American or British usage is accepted, but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission please visit http://www.elsevier.com/languageediting or our customer support site at http://support.elsevier.com for more information.
Submission
Submission to this journal proceeds totally online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files to a single PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are converted to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for a paper trail.
Please submit your article via http://ees.elsevier.com/adwr/
Referees
Please submit, with the manuscript, the names, addresses and e-mail addresses of 3 potential referees. Note that the editor retains the sole right to decide whether or not the suggested reviewers are used.
Use of wordprocessing software
It is important that the file be saved in the native format of the wordprocessor used. The text should be in single-column format. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. In particular, do not use the wordprocessor's options to justify text or to hyphenate words. However, do use bold face, italics, subscripts, superscripts etc. Do not embed "graphically designed" equations or tables, but prepare these using the wordprocessor's facility. When preparing tables, if you are using a table grid, use only one grid for each individual table and not a grid for each row. If no grid is used, use tabs, not spaces, to align columns. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier: http://www.elsevier.com/guidepublication). Do not import the figures into the text file but, instead, indicate their approximate locations directly in the electronic text and on the manuscript. See also the section on Electronic illustrations.
To avoid unnecessary errors you are strongly advised to use the "spell-check" and "grammar-check" functions of your wordprocessor.
LaTeX
If the LaTeX file is suitable, proofs will be produced without rekeying the text. The article should preferably be written using Elsevier's document class "elsarticle", or alternatively any of the other recognized classes and formats supported in Elsevier's electronic submissions system, for further information see http://www.elsevier.com/wps/find/authorsview.authors/latex-ees-supported.
The Elsevier "elsarticle" LaTeX style file package (including detailed instructions for LaTeX preparation) can be obtained from the Quickguide: http://www.elsevier.com/latex. It consists of the file: elsarticle.cls, complete user documentation for the class file, bibliographic style files in various styles, and template files for a quick start.
Article structure
Subdivision - numbered sections
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to "the text". Any subsection may be given a brief heading. Each heading should appear on its own separate line.
Introduction
State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Material and methods
Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.
Theory/calculation
A Theory section should extend, not repeat, the background to the article already dealt with in the Introduction and lay the foundation for further work. In contrast, a Calculation section represents a practical development from a theoretical basis.
Results
Results should be clear and concise.
Discussion
This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.
Conclusions
The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.
Appendices
If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.
Essential title page information
• Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
• Author names and affiliations. Where the family name may be ambiguous (e.g., a double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address. Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each author.
• Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address and the complete postal address.
• Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a "Present address" (or "Permanent address") may be indicated as a footnote to that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript Arabic numerals are used for such footnotes.
Abstract
A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.
The abstract should be about 100-150 words in length.
Keywords
Immediately after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding general and plural terms and multiple concepts (avoid, for example, "and", "of"). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.
Acknowledgements
Collate acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, writing assistance or proof reading the article, etc.).
Nomenclature and Units
The SI system should be used for all scientific and laboratory data; if, in certain instances, it is necessary to quote other units, these should be added in parentheses. Temperatures should be given in degrees Celsius. The unit 'billion' (109 in America, 1012 in Europe) is ambiguous and must not be used. Abbreviations for units should follow the suggestions of the British Standards publication BS 1991. The full stop should not be included in abbreviations, e.g. m (not m.), ppm (not p.p.m.); '%' and '/' should be used in preference to 'per cent' and 'per'. Where abbreviations are likely to cause ambiguity or not be readily understood by an international readership, units should be put in full.
Math formulae
Present simple formulae in the line of normal text where possible and use the solidus (/) instead of a horizontal line for small fractional terms, e.g., X/Y. In principle, variables are to be presented in italics. Powers of e are often more conveniently denoted by exp. Number consecutively any equations that have to be displayed separately from the text (if referred to explicitly in the text).
Footnotes
Footnotes should be used sparingly. Number them consecutively throughout the article, using superscript Arabic numbers. Many wordprocessors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at the end of the article. Do not include footnotes in the Reference list.
Table footnotes
Indicate each footnote in a table with a superscript lowercase letter.
Artwork
Electronic artwork
General points
• Make sure you use uniform lettering and sizing of your original artwork.
• Save text in illustrations as "graphics" or enclose the font.
• Only use the following fonts in your illustrations: Arial, Courier, Times, Symbol.
• Number the illustrations according to their sequence in the text.
• Use a logical naming convention for your artwork files.
• Provide captions to illustrations separately.
• Produce images near to the desired size of the printed version.
• Submit each figure as a separate file.
A detailed guide on electronic artwork is available on our website:
http://www.elsevier.com/artworkinstructions
You are urged to visit this site; some excerpts from the detailed information are given here.
Formats
Regardless of the application used, when your electronic artwork is finalised, please "save as" or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
EPS: Vector drawings. Embed the font or save the text as "graphics".
TIFF: color or grayscale photographs (halftones): always use a minimum of 300 dpi.
TIFF: Bitmapped line drawings: use a minimum of 1000 dpi.
TIFF: Combinations bitmapped line/half-tone (color or grayscale): a minimum of 500 dpi is required.
DOC, XLS or PPT: If your electronic artwork is created in any of these Microsoft Office applications please supply "as is".
Please do not:
• Supply embedded graphics in your wordprocessor (spreadsheet, presentation) document;
• Supply files that are optimised for screen use (like GIF, BMP, PICT, WPG); the resolution is too low;
• Supply files that are too low in resolution;
• Submit graphics that are disproportionately large for the content.
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure, at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether or not these illustrations are reproduced in color in the printed version. For color reproduction in print, you will receive information regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color in print or on the Web only. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to "gray scale" (for the printed version should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Figure captions
Ensure that each illustration has a caption. Supply captions separately, not attached to the figure. A caption should comprise a brief title (not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Text graphics
Present incidental graphics not suitable for mention as figures, plates or schemes at the end of the article and number them "Graphic 1", etc. Their precise position in the text can then be indicated. See further under Electronic artwork. If you are working with LaTeX and have such features embedded in the text, these can be left, but such embedding should not be done specifically for publishing purposes. Further, high-resolution graphics files must be provided separately.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and ensure that the data presented in tables do not duplicate results described elsewhere in the article.
References
Citation in text
Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the text. If these references are included in the reference list they should follow the standard reference style of the journal and should include a substitution of the publication date with either "Unpublished results" or "Personal communication" Citation of a reference as "in press" implies that the item has been accepted for publication.
Web references
As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
References in a special issue
Please ensure that the words 'this issue' are added to any references in the list (and any citations in the text) to other articles in the same Special Issue.
Reference management software
This journal has standard templates available in key reference management packages EndNote ( http://www.endnote.com) and Reference Manager ( http://www.refman.com). Using plug-ins to wordprocessing packages, authors only need to select the appropriate journal template when preparing their article and the list of references and citations to these will be formatted according to the journal style which is described below.
Reference style
Text: Indicate references by number(s) in square brackets in line with the text. The actual authors can be referred to, but the reference number(s) must always be given.
List: Number the references (numbers in square brackets) in the list in the order in which they appear in the text.
Examples:
Reference to a journal publication:
[1] Van der Geer J, Hanraads JAJ, Lupton RA. The art of writing a scientific article. J Sci Commun 2000;163:51–9.
Reference to a book:
[2] Strunk Jr W, White EB. The elements of style. 3rd ed. New York: Macmillan; 1979.
Reference to a chapter in an edited book:
[3] Mettam GR, Adams LB. How to prepare an electronic version of your article. In: Jones BS, Smith RZ, editors. Introduction to the electronic age, New York: E-Publishing Inc; 1999, p. 281–304.
Note shortened form for last page number. e.g., 51–9, and that for more than 6 authors the first 6 should be listed followed by "et al." For further details you are referred to "Uniform Requirements for Manuscripts submitted to Biomedical Journals" (J Am Med Assoc 1997;277:927–934) (see also http://www.nlm.nih.gov/bsd/uniform_requirements.html).
Journal abbreviations source
Journal names should be abbreviated according to
Index Medicus journal abbreviations: http://www.nlm.nih.gov/tsd/serials/lji.html;
List of serial title word abbreviations: http://www.issn.org/2-22661-LTWA-online.php;
CAS (Chemical Abstracts Service): http://www.cas.org/sent.html.
Video data
Elsevier accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit with their article are strongly encouraged to include these within the body of the article. This can be done in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material is directly usable, please provide the files in one of our recommended file formats with a maximum size of 10 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose any frame from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the link to your video data. For more detailed instructions please visit our video instruction pages at http://www.elsevier.com/artworkinstructions. Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that refer to this content.
Supplementary data
Elsevier accepts electronic supplementary material to support and enhance your scientific research. Supplementary files offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products, including ScienceDirect: http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable, please provide the data in one of our recommended file formats. Authors should submit the material in electronic format together with the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction pages at http://www.elsevier.com/artworkinstructions.
Submission checklist
It is hoped that this list will be useful during the final checking of an article prior to sending it to the journal's Editor for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following items are present:
One Author designated as corresponding Author:
• E-mail address
• Full postal address
• Telephone and fax numbers
All necessary files have been uploaded
• Keywords
• All figure captions
• All tables (including title, description, footnotes)
Further considerations
• Manuscript has been "spellchecked" and "grammar-checked"
• References are in the correct format for this journal
• All references mentioned in the Reference list are cited in the text, and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Web)
• Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print or to be reproduced in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required, black and white versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site at http://support.elsevier.com.
Use of the Digital Object Identifier
The Digital Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore, it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic information. The correct format for citing a DOI is shown as follows (example taken from a document in the journal Physics Letters B):
doi:10.1016/j.physletb.2003.10.071
When you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed never to change.
Proofs
One set of page proofs (as PDF files) will be sent by e-mail to the corresponding author (if we do not have an e-mail address then paper proofs will be sent by post) or, a link will be provided in the e-mail so that authors can download the files themselves. Elsevier now provides authors with PDF proofs which can be annotated; for this you will need to download Adobe Reader version 7 (or higher) available free from http://www.adobe.com/products/acrobat/readstep2.html. Instructions on how to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the Adobe site: http://www.adobe.com/products/acrobat/acrrsystemreqs.html#70win.
If you do not wish to use the PDF annotations function, you may list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your corrections quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or by post. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible to get your article published quickly and accurately. Therefore, it is important to ensure that all of your corrections are sent back to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article if no response is received.
Offprints
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail. For an extra charge, paper offprints can be ordered via the offprint order form which is sent once the article is accepted for publication. The PDF file is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
For inquiries relating to the submission of articles (including electronic submission where available) please visit this journal's homepage. You can track accepted articles at http://www.elsevier.com/trackarticle and set up e-mail alerts to inform you of when an article's status has changed. Also accessible from here is information on copyright, frequently asked questions and more. Contact details for questions arising after acceptance of an article, especially those relating to proofs, will be provided by the publisher.
Editorial Board
Editors:
D.A. Barry, The University of Edinburgh, School of Engineering and Electronics, Crew Building, The King's Buildings, Edinburgh, EH9 3JN, UK Tel: +44 131 650 7204, Fax: +44 131 650 7276, Email: a.barry@ed.ac.uk
W.F. Krajewski, University of Iowa, IIHR Hydroscience and Engineering, 300 South Riverside Drive, Iowa City, IA 52242-1585, USA Tel: +1 319 335 5231, Fax: +1 319 335 5238, Email: witold-krajewski@uiowa.edu
C.T. Miller, University of North Carolina, Dept. of Env. Sciences & Engineering, CB 7400, 106 Rosenau Hall, Chapel Hill, NC 27599-7400, USA Tel: +1 919 966 2643, Fax: +1 919 966 7911, Email: casey_miller@unc.edu
Editorial Board:
M.B. Allen, University of Wyoming, Department of Mathematics, Laramie, WY 82071, USA Tel: +1 307 766 4221, Fax: +1 307 766 6838, Email: allen@uwyo.edu
T. Arbogast, The University of Texas at Austin, TICAM, Austin, TX 78712, USA Tel: +1 512 475 8628, Fax: +1 512 232 2445, Email: arbogast@ticam.utexas.edu
R.D. Beckie, University of British Columbia, Department of Earth and Ocean Sciences, 6339 Stores Road, Vancouver, BC V6T 1Z4, Canada Tel: +1 604 822 6462, Fax: +1 604 822 6088, Email: rbeckie@eos.ubc.can
L. Bennethum, University of Colorado at Denver, Center for Computational Mathematics, Campus Box 170, P.O. Box 17336, Denver, CO 80217, USA Tel: +1 303 556 4810, Fax: +1 303 556 8550, Email: lynn.bennethum@cudenver.edu
B. Berkowitz, Weizmann Institute of Science, Department of Environmental Sciences and Energy Research, Rehovot, 76100, Israel Tel: +972 8 934 2098, Fax: +972 8 934 4124, Email: brian.berkowitz@weizmann.ac.il
K. Beven, Lancaster University, Environmental Science Division, Inst. of Env. & Biological Sciences, Lancaster, LA1 4YQ, UK Tel: +44 1524 593892, Fax: +44 1542 593985, Email: k.beven@lancaster.ac.uk
M. Blunt, Imperial College, T.H. Huxley School, Department of Petroleum Engineering, Prince Consort Road, London, SW7 2BP, United Kingdom Tel: +44 20 759 46500, Fax: +44 20 7597444, Email: m.blunt@ic.ac.uk
M.A. Celia, Princeton University, Dept. of Civil Engineering & Operations Research, Princeton, NJ 08544, USA Tel: +1 609 258 5425, Fax: +1 609 258 2799, Email: celia@karst.princeton.edu
G. Christakos, University of North Carolina, School of Public Health, DESE, 111 Rosenau Hall, Chapel Hill, NC 27599-7400, USA Tel: +1 919 966 1767, Fax: +1 919 966 7911, Email: george_christakos@unc.edu
C. Dawson, University of Texas at Austin, Texas Institute for Computational & Applied Mathematics, TAY 2.400, Austin, TX 78712, USA Tel: +1 512 475 8627, Fax: +1 512 471 8694, Email: clint@brahma.ticam.utexas.edu
E. Eltahir, Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, Room 48-209, Cambridge, MA 02139, USA Tel: +1 617 253 6596, Fax: +1 617 253 7462, Email: eltahir@mit.edu
C. Enfield, US EPA Facilities, 26 West Martin Luther King Drive, Cincinnati, OH 45268, USA Tel: +1 513 569 7489, Fax: +1 513 569 7480, Email: enfield.carl@epa.gov
E. Foufoula-Georgiou, University of Minnesota, St. Anthony Falls Laboratory, Department of Civil Engineering, Mississippi River at 3rd Ave., S.E., Minneapolis, MN 55414, USA; Tel: +1 612 627 4595, Fax: +1 612 627 4609, Email: efi@tc.umn.edu
T.R. Ginn, University of California, Civil and Environmental Engineering, 172 Everson Hall, Davis, CA 95616, USA Tel: +1 530 752 1707, Fax: +1 530 752 1707, Email: trginn@ucdavis.edu
J.J. Gómez-Hernández, Universidad de Politecnica de Valencia, Dept. de Ingeniera Hidraulica, Apartado Correos 22012, 46071 Valencia, Spain Tel: +34 63 879614, Fax: +34 63 877618, Email: jaime@dihma.upv.es
R.B. Grayson, University of Melbourne, CRC for Catchment Hydrology and Environmental Applied Hydrology, Parkville, Victoria 3010, Australia; Tel: +61 3 83446623, Fax: +61 3 83446215, Email: rodger@civag.unimelb.edu.au
S.M. Hassanizadeh, Delft University of Technology, Faculty of Civil Engineering and Geosciences, P.O. Box 5048, 2600 GA Delft, The Netherlands Tel: +31 15 2787 346, Fax: +31 15 2785 915, Email: Majid.Hassanizadeh@ct.tudelft.nl
R. Helmig, Universität Stuttgart, Institut für Hydromechanik und Hydrosystemmodellierung, Pfaffenwaldring 61, D-70569 Stuttgart Valhingen, Germany Tel: +49 711 6854717, Fax: +49 711 6857020, Email: rainer.helmig@iws.uni-stuttgart.de
J. Hopmans, University of California, Dept. Land, Air and Water Resources, 123 Veihmeyer Hall, Davis, CA 95616, USA jwhopmans@ucdavis.edu Tel: +1 916 752 3060, Fax: +1 916 752 5262, Email: whopmans@ucdavis.edu
P.T. Imhoff, University of Delaware, Department of Civil and Environmental Engineering, 360 DuPont Hall, Newark, DE 19716-3120, USA Tel: +1 302 831 0541, Fax: +1 302 831 3640, Email: imhoff@udel.edu
G. Katul, Duke University, School of Environment, P.O. Box 90328, Durham, NC 27708-0328, USA Tel: +1 919 613 8033, Fax: +1 919 684 8741, Email: gaby@duke.edu
C.T. Kelley, North Carolina State University, Department of Mathematics, Box 8205, Raleigh, NC 27695, USA; Tel: +1 919 515 7163, Fax: +1 919 515 3798, Email: Tim_Kelley@ncsu.edu
W. Kinzelbach, ETH-Hönggerberg, Hydromechanik und Wasserwirtschaft, CH-8093 Zürich, Switzerland Tel: +41 1 633 3066, Fax: +41 1 633 1061, Email: kinzelbach@ihw.baug.ethz.ch
R.L. Kolar, University of Oklahoma, School of Civil Engineering, 202 W. Boyd St., Room 334, Norman, OK 73019, USA Tel: +1 405 325 4267, Fax: +1 405 325 4217, Email: kolar@ou.edu
H.P. Langtangen, University of Oslo, Dept. of Informatics, P.O. Box 1080, Blindern, N-0316 Oslo, Norway Tel: +47 2284 00 93, Fax: +47 2285 43 49, Email: hpl@ifi.uio.no
D.A. Lockington, University of Queensland, Dept. of Civil Engineering, Brisbane, QLD, 4072, Australia Tel: +61 7 3365 4054, Fax: +61 7 3365 4599, Email: d.lockington@mailbox.uq.edu.au
A.S. Mayer, Michigan Technology University, Dept. of Geological Engineering, Geology & Geophysics, 1400 Townsend Drive, Houghton, MI 49931-1295, USA Tel: +1 906 487 3372, Fax: +1 906 487 3371, Email: asmayer@mtu.edu
D. McKnight, INSTAAR, 1560 30th Street, Boulder, CO 80309-0450, USA Tel: +1 303 492 4687, Fax: +1 303 492 6388, Email: diana.mcknight@colorado.edu
D. McLaughlin, Massachusetts Inst. of Technology, Ralph M Parsons Lab., Dept. of Civil & Environmental Eng., Room 48-209, Cambridge, MA 02139, USA Tel: +1 617 253 7176, Fax: +1 617 253 7462, Email: dennesm@mit.edu
J.L. Nieber, University of Minnesota, Department of Biosystems and Agricultural Engineering, 1390 Ecles Ave., St. Paul, MN 555045, USA; Tel: +1 612 625 6724, Fax: +1 612 624 3005, Email: nieber@gaia.bae.umn.edu
M. Oostrom, Pacific Northwest National Laboratory, Environmental Technology Division, P.O. Box 999, MS K9-33, Richland, WA 99352, USA Tel: +1 509 372 6044, Fax: +1 509 372 6089, Email: mart.oostrom@pnl.gov
M. Parlange, The Johns Hopkins University, Dept. of Geography & Env. Eng., 313 Ames Hall, Baltimore, MD 21218-2686, USA; E-mail: mbparlange@jhu.edu Tel: +1 410 516 6042, Fax: +1 410 516 8996, Email: mbparlange@jhu.edu
S.E. Powers, Clarkson University, Department of Civil and Environmental Engineering, P.O. Box 5710, Potsdam, NY 13699-5710, USA; Tel: +1 315 268 6542, Fax: +1 315 268 7985, Email: sep@clarkson.edu
M. Quintard, IMFT, Alláe du Professor Camile Soulas, F-31400 Toulouse, France. Tel: +33 5 61285921 , Fax: +33 5 61285878 , Email: michel.quintard@imft.fr
A. Rinaldo, Universita di Padova, Centro Internazionale di Idrologia, "D.Tonini" Dipt. di Idraulica, Via Loredan 20, I-35131 Padova, Italy Tel: +39 49 8275431, Fax: +39 49 9275446, Email: rinaldo@idra.unipd.it
I. Rodríguez-Iturbe, Princeton University, Dept. of Civil and Environmental Engineering, E-220 Engineering Quad., N.J. 08544, USA. Tel: +1 609 258 2287, Fax: +1 609 258 2799, Email: irodrigu@princeton.edu
G. Salvucci, Boston University, Department of Earth Sciences, Stone Science Bld., Room 457, 675 Commonwealth Ave., Boston, MA 02215, USA; Tel: +1 617 353 8344, Fax: +1 617 252 8399, Email: gdsalvuc@bu.edu
J. Selker, Oregon State University, Department of Bioresource Engineering, Gilmore Hall, Room 240, Corvallis, OR 97331-3906, USA; Tel: +1 541 737 6304, Fax: +1 541 737 2082, Email: selkerj@engr.orst.edu
M. Sivapalan, University of Western Australia, Centre for Water Research, Department of Environmental Engineering, 35 Stirling Highway, Crawley, WA 6009, Australia Tel: +61 8 9380 2320, Fax: +61 8 9380 1015, Email: sivapalan@cwr.uwa.edu.au
B.E. Sleep, University of Toronto, Department of Civil Engineering, 35 St. George Street, Toronto, ON M5S 1A4, Canada; Tel: +1 416 978 3005, Fax: +1 416 978 3674, Email: sleep@enviro.civ.utoronto.ca
J.A. Smith, Princeton University, Department of Civil and Environmental Engineering, c-319G E-Quad, Princeton, NJ 08544, USA Tel: +1 609 258 4615, Fax: +1 609 258 2799, Email: jsmith@princeton.edu
S. Sorooshian, University of Arizona, Department of Hydrology amd Water Resources, Tucson, AZ 85721, USA; Tel: +1 520 621 1661, Fax: +1 520 626 2488, Email: soroosh@hwr.arizona.edu
G. Sposito, University of California, Dept. of Civil and Environmental Engineering, 631 Davis Hall # 1710, Berkeley, CA 94720-1710, USA Tel: +1 510 643 8297, Fax: +1 510 643 2940, Email: gsposito@nature.berkeley.edu
A.F.B. Tompson, University of California, Lawrence Livermore National Laboratory, Geosciences and Environmental Technologies Division, L-204, P.O. Box 808, Livermore, CA 94551, USA Tel: +1 925 422 6348, Fax: +1 925 423 1997, Email: afbt@llnl.gov
P.A. Troch, Wageningen University, Hydrology and Quantitative Water Management, Environmental Sciences, Nieuwe Kanaal 11, 6709 PA Wageningen, The Netherlands Tel: +31 317 48 43 97, Fax: +31 317 48 48 85, Email: peter.troch@users.whh.wau.nl
A.J. Valocchi, University of Illinois-Urbana, Hydrosystems Laboratory, Department of Civil Engineering, 205 North Mathews Avenue, Urbana, IL 61801, USA; Tel: +1 217 333 3176, Fax: +1 217 333 0687, Email: valocchi@uiuc.edu
M.Th. van Genuchten, U.S. Salinity Laboratory, 450 W. Big Springs Road, Riverside, CA 92507-4617, USA Tel: +1 909 369 4847, Fax: +1 909 342 4964, Email: rvang@USSL.ars.usda.gov
C. Welty, Drexel University, School of Environmental Science, Engineering and Policy, Nesbitt Hall 606, 3141 Chestnut St., Philadelphia, PA 19104, USA; Tel: +1 215 895 2281, Fax: +1 215 895 2267, Email: weltyc@drexel.edu
J.L. Wilson, New Mexico Institute of Technology, Department of Earth and Environmental Sciences, Socorro, NM 87801, USA; Tel: +1 505 835 5634, Fax: +1 505 835 5634, Email: jwilson@nmt.edu
C.S. Woodward, Lawrence Livermore National Laboratory, Center for Applied Scientific Computing, Box 808, L-561, Livermore, CA 94551, USA; Tel: +1 925 424 6013, Fax: +1 925 423 2993, Email: cswoodward@llnl.gov
T. Yamada, Chuo University, Department of Civil Engineering, 1-13-27 Kasuga, Bunkyo-ku, Tokyo, 112-8551, Japan; Tel: +81 3 3817 1805, Fax: +81 3 3817 1803, Email: yamada@hyd.civil.chuo-u.ac.jp
|
刊名字顺( Alphabetical List of Journals):
返回页首 